D6T Track-Type Tractor Systems Caterpillar


Case and Frame

Usage:

D6T LGP HTZ


Illustration 1g03752436

Table 1
Specification for 467-7924 Case and Frame Gp 
Item  Qty  Part  Specification description 
Surface must be free of paint.  
9P-1779 Bushing  Bore before assembly is 50.203 ± 0.013 mm (1.9765 ± 0.0005 inch).
Bearing must be flush with surface as shown. 
3T-0996 Bushing  Bore before assembly is 50.203 ± 0.013 mm (1.9765 ± 0.0005 inch).
Bearing must be flush with surface as shown. 
Before assembly, apply blue Loctite 243 to the internal threads. 
Valve should not be assembled below flush with inside wall of case. 

Caterpillar Information System:

335F CR Excavator Machine Systems Refrigerant Receiver-Dryer - Remove and Install
335F CR Excavator Machine Systems Swing Motor - Assemble
335F CR Excavator Machine Systems Swing Motor - Disassemble
2014/12/18 A New Check Valve and Pressure Sensors Are Used on Certain Tier 4 Interim Machine Engines {1439}
924K, 926M, 930K, 930M, 938K and 938M Wheel Loaders Solenoid Valve - Test
2014/11/27 New Anti - Drift Valve Logic Element Is Now Used On Certain Medium Wheel Loaders {5067}
Supplemental Service Information for the USAF 980H Rough Terrain Forklift {0374, 7000} Supplemental Service Information for the USAF 980H Rough Terrain Forklift {0374, 7000}
924K, 926M, 930K, 930M, 938K and 938M Wheel Loaders Sensor Supply - Test
2015/01/06 Improved Securing of Tilt Harness for Certain Medium Wheel Loaders {1408}
2015/04/01 An Improved Power Train Hose Assembly Is Now Used On Certain D8T Track-Type Tractors {3016}
2014/12/10 Improved Power Train Software Is Now Available for Certain 990H Wheel Loader {4269, 5737, 7620}
924K, 926M, 930K, 930M, 938K and 938M Wheel Loaders Sensor Signal (PWM) - Test
D6T Track-Type Tractor Systems Final Drive
D6T Track-Type Tractor Systems Lift Cylinder (Bulldozer) - Position Sensor
D6T Track-Type Tractor Systems Tilt Cylinder (Bulldozer) - Position Sensor
D6T Track Type Tractor Machine Systems Final Drive Mounting
D6T Track-Type Tractor Systems Final Drive
2014/12/03 Exhaust Cooler (NRS) for Certain C6.6 Machine Engines {1061, 1087, 108C}
D6T Track-Type Tractor Systems Final Drive
D6T Track-Type Tractor Systems Final Drive Mounting
D6T Track-Type Tractor Systems Cab Liner
D6T Track-Type Tractor Systems Fuel Tank
D6T Track Type Tractor Machine Systems Position Sensor (Decelerator)
D6T Track-Type Tractor Systems Dust Ejector
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.