Stick Cylinder Lines - Stick Lowering Control
Show/hide table
| 图 1 | g01609023 |
(1) 管组件的扭矩 ... 76 ± 4 N·m (55 ± 3 lb ft)
(B) 从安装销中心线到支撑组件的距离 ... 570 ± 3 mm (22.4 ± 0.1 in)
(C) 支撑组件的方向 ... 30 ± 3 度
(2) 8 只螺栓的扭矩 ... 39 ± 8 N·m (29 ± 6 lb ft)
(3) 2 只螺栓的扭矩 ... 30 ± 7 N·m (22 ± 5 lb ft)
Caterpillar Information System:
Starting Motor - Delco 50-MT Armature - Test
Starting Motor - Delco 50-MT Field Winding - Test
Starting Motor - Delco 50-MT Starting Motor Solenoid - Test
Starting Motor - Delco 50-MT Pinion Continues to Engage after Engine Starts
Starting Motor - Delco 50-MT Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT Pinion Does Not Engage Ring Gear
Starting Motor - Delco 50-MT Service Tools
Starting Motor - Delco 50-MT General Information
C9 On-highway Engine Cylinder Block Cover - Remove and Install
Starting Motor - Delco 50-MT General Information
Starting Motor - Delco 50-MT Component Description
Starting Motor - Delco 50-MT Brush and Brush Holder - Check
Starting Motor - Delco 50-MT Pinion Drive - Check
Starting Motor - Delco 50-MT No Load - Test
Starting Motor - Delco 50-MT Pinion Clearance - Adjust
Starting Motor - Delco 50-MT Starting Motor Does Not Turn or Turns Slowly
C9 Agricultural Engine for Challenger Tractors Engine Shutdown Is Intermittent
Starting Motor - Delco 50-MT General Information
Starting Motor - Delco 50-MT Starting Motor - Disassemble
Starting Motor - Delco 50-MT Starting Motor - Assemble
3176C, 3406E and 3456 Industrial Engines Engine Stalls at Low RPM
C4.4 (Mech) Industrial Engine Crankcase Breather (Canister) - Replace
C3.4 IND Industrial Engine Engine Valve Lash - Inspect/Adjust