Battery and Wiring - Install - Cold Weather
Parts and Specification Information
Show/hide table
Illustration 1 | g03498397 |
Show/hide table
Illustration 2 | g03499657 |
Parts are located in Crate 6.
Note: Verifying all parts are shipped and undamaged for preparation of assembly. Missing or damaged parts can be ordered prior to assembly to avoid delays during assembly.
Show/hide table
Item | Part Number | Part Description | Qty | Specification | Approximate Weight | |
415-4835 Battery and Wiring Gp | ||||||
1 | 357-9584 | Plates | 22 | |||
2 | 415-4837 | Cable As | 1 | Tighten the battery terminals to a torque of |
||
3 | 3S-2093 | Cable Straps | 5 | |||
4 | 6G-2263 | Spacers | 11 | |||
5 | 9U-1469 | Clamps | 11 | |||
6 | 8T-4121 | Hard Washers | 16 | |||
7 | 8T-4185 | Bolts
(M10X1.5X50-MM) |
11 | |||
8 | 415-4836 | Cable As | 1 | Tighten the battery terminals to a torque of |
||
9 | 8T-4133 | Nut
(M10X1.5) |
1 | |||
10 | 6V-7687 | Locknuts
(M12X1.75) |
4 | Tighten to a torque of |
||
11 | 8T-4223 | Hard Washers | 8 | |||
12 | 8X-7847 | Rods | 4 | |||
13 | 8W-4479 | Hold-Down | 1 | |||
14 | 8T-4244 | Nuts
(M12X1.75) |
4 | |||
15 | 118-1277 | Battery Cable As | 1 | Tighten the battery terminals to a torque of |
||
16 | 8T-4136 | Bolt
(M10X1.5X25-MM) |
4 | |||
17 | 101-4000 | Battery Gp | 2 | |
||
18 | 432-4290 | Plate As | 1 |
- Install one plate assembly (18), four hard washers (6), and four bolts (16).
- Install four hard washers (11), four nuts (14), and four rods (12).
Show/hide table
Illustration 4 g03499662 (10) 6V-7687 Locknuts (M12X1.75)
(11) 8T-4223 Hard Washers
(13) 8W-4479 Hold-Down
(17) 101-4000 Battery Gp - Use two people to install two battery groups (17). The weight of each battery group (17) is approximately
39 kg (86 lb) . - Install one hold down (13), four hard washers (11), and four locknuts (10). Tighten four locknuts (10) to a torque of
10 ± 2 N·m (89 ± 18 lb in) .Show/hide tableIllustration 5 g03499664 (19) 8T-4185 Bolts (M10X1.5X50-MM)
(20) 8T-4121 Hard Washers
(21) 8T-4133 Nut (M10X1.5)
(22) 389-4642 Cable As - Loosen two bolts (19) and two hard washers (20).
- Remove one nut (21) and one hard washer (20). Disconnect cable assembly (22).
Show/hide table
Illustration 6 g03499666 (2) 415-4837 Cable As
(19) 8T-4185 Bolts (M10X1.5X50-MM)
(20) 8T-4121 Hard Washers
(21) 8T-4133 Nut (M10X1.5)
(22) 389-4642 Cable As - Position one cable assembly (2). Connect one cable assembly (2) and one cable assembly (22). Install one hard washer (20) and one nut (21).
- Route cable assembly (2) and secure with two hard washers (20) and two bolts (19).
Show/hide table
Illustration 7 g03499668 (3) 3S-2093 Cable Strap
(6) 8T-4121 Hard Washer
(8) 415-4836 Cable As
(9) 8T-4133 Nut (M10X1.5) - Position one cable assembly (8). Connect one cable assembly (8). Install one hard washer (6) and one nut (9).
- Secure the cover on cable assembly (8) with one cable strap (3).
Show/hide table
Illustration 8 g03499671 (1) 357-9584 Plates
(2) 415-4837 Cable As
(4) 6G-2263 Spacers
(5) 9U-1469 Clamps
(6) 8T-4121 Hard Washers
(7) 8T-4185 Bolts (M10X1.5X50-MM)
(8) 415-4836 Cable As - Route cable assembly (2) and cable assembly (8). Secure cable assembly (2) and cable assembly (8) with six plates (1), three spacers (4), three clamps (5), three hard washers (6), and three bolts (7).
Show/hide table
Illustration 9 g03499672 (1) 357-9584 Plates
(2) 415-4837 Cable As
(4) 6G-2263 Spacers
(5) 9U-1469 Clamps
(6) 8T-4121 Hard Washers
(7) 8T-4185 Bolts (M10X1.5X50-MM)
(8) 415-4836 Cable As - Route cable assembly (2) and cable assembly (8). Secure cable assembly (2) and cable assembly (8) with four plates (1), two spacers (4), two clamps (5), two hard washers (6), and two bolts (7).
Show/hide table
Illustration 10 g03499673 (23) 8T-4185 Bolts (M10X1.5X50-MM)
(24) 8T-4121 Hard Washers - Loosen one bolt (23) and one hard washer (24).
Show/hide table
Illustration 11 g03500596 (1) 357-9584 Plates
(2) 415-4837 Cable As
(4) 6G-2263 Spacers
(5) 9U-1469 Clamps
(6) 8T-4121 Hard Washers
(7) 8T-4185 Bolts (M10X1.5X50-MM)
(8) 415-4836 Cable As
(23) 8T-4185 Bolts (M10X1.5X50-MM)
(24) 8T-4121 Hard Washers - Route cable assembly (2) and cable assembly (8). Secure cable assembly (2) and cable assembly (8) with ten plates (1), five spacers (4), five clamps (5), five hard washers (6), five bolts (7), one hard washer (24), and one bolt (23).
Show/hide table
Illustration 12 g03500597 (1) 357-9584 Plates
(2) 415-4837 Cable As
(3) 3S-2093 Cable Strap
(4) 6G-2263 Spacers
(5) 9U-1469 Clamps
(6) 8T-4121 Hard Washers
(7) 8T-4185 Bolts (M10X1.5X50-MM)
(8) 415-4836 Cable As
(15) 118-1277 Battery Cable As - Route cable assembly (2). Secure cable assembly (2) with two plates (1), one spacer (4), one clamp (5), one hard washer (6), one bolt (7). Connect cable assembly (2) to the battery group. Tighten the terminal of cable assembly (2) to a torque of
7 ± 1 N·m (62 ± 9 lb in) . Secure the cover on cable assembly (2) with one cable strap (3). - Install battery cable assembly (15). Tighten the terminals of battery cable assembly (15) to a torque of
7 ± 1 N·m (62 ± 9 lb in) . Secure the covers on battery cable assembly (15) with two cable straps (3). - Connect cable assembly (8) to the battery group. Tighten the terminal of cable assembly (8) to a torque of
7 ± 1 N·m (62 ± 9 lb in) . Secure the cover on cable assembly (8) with one cable strap (3).
Show/hide table
Illustration 3 | g03499660 |
(6) 8T-4121 Hard Washers
(11) 8T-4223 Hard Washers (12) 8X-7847 Rods (14) 8T-4244 Nuts (M12X1.75) (16) 8T-4136 Bolts (M10X1.5X25-MM) (18) 432-4290 Plate As |
Caterpillar Information System:
3500E Marine Engines Product Storage
994K Large Wheel Loader Field Assembly Manual Bypass Valve (Fan) - Install
335F Excavator Machine Systems Solenoid Valve (Fine Swing) - If Equipped
C4.4 Industrial Engine Engine Crankcase Breather Element - Replace
C4.4 Industrial Engine Engine Air Cleaner Element (Dual Element/Canister Type) - Clean/Replace - If Equipped
C4.4 Industrial Engine Engine - Clean
374F Excavator Machine System Fuel Tank and Mounting
374F Excavator Machine System Stick Lines
C4.4 Industrial Engine Coolant Level - Check
374F Excavator Machine System Boom Cylinder Lines
D6M Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6M Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
374F Excavator Machine System Boom Lines
2013/10/28 Engine ECM Clearing Process for Dealers Is Now Available on Certain Applications {1901, 1920}
2013/11/21 An Improved Ether Starting Valve Is Now Available on Certain D6K Track-type Tractors {1456}
2013/11/12 A Temporary Cab Harness As Can Now be Used on Certain Compact Wheel Loaders {1408}
Comfort Series Seat For Caterpillar Machines Component Descriptions
Comfort Series Seat For Caterpillar Machines Troubleshooting
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems General Information (Brake System)
2013/10/25 Machine Engine ECM Clearing Process for Dealers Is Now Available on Certain Applications {1901, 1920}
950 GC Wheel Loader Power Train / Electrohydraulic Control Condition Switch (Two Wire) - Test
2013/11/04 New Ferrite Bead and Relay Harness Is Now Available For Certain Generator Sets Equipped With PL421 {4450, 7606}
994K Wheel Loader Commissioning Procedure {0374, 1000, 7000, 7960, 7961} 994K Wheel Loader Commissioning Procedure {0374, 1000, 7000, 7960, 7961}
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems General Information (Power Train System)
C15 and C18 Engines for Caterpillar Built Machines Coolant Temperature Is Low