C9.3 Industrial Engine Caterpillar

Illustration 1	g01330599

When the electric starting motor is viewed from the drive end, the motor rotates in the following direction. ... Clockwise

Specifications

System voltage ... 12 V

Maximum operating voltage ... 8 V

No load conditions

Minimum speed with no load ... 2000 rpm

Maximum current with no load ... 200 amp

Voltage ... 11.5 V

(1) Battery terminal

Maximum number of cable or wire terminals between the nuts ... 3

Tighten the nut on the battery terminal to the following torque. ... 25 ± 5 N·m (18 ± 4 lb ft)

(2) Ground terminal

Tighten the nut on the ground terminal to the following torque. ... 2.5 ± 0.5 N·m (22 ± 4 lb in)

(3) Switch terminal

Tighten the nut on the switch terminal to the following torque. ... 25 ± 5 N·m (18 ± 4 lb ft)

Note: The wire terminal that is on the switch terminal must be insulated with heat shrink tubing. Do not use molded terminals.