Air Shutoff
Show/hide table
| |
| 图 1 | g03242597 |
Show/hide table
| 技术规格 - 274-5750 空气切断阀总成 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 2 | 263-2905 限制开关组件 | 装配切断阀前，在螺纹上涂抹 Loctite C5A 铜防咬合剂。
拧紧至扭矩为 |
| 2 | 1 | 288-2758 空气切断阀总成 | 最大工作温度为 最大工作压力为 |
| 3 | 1 | 288-2759 空气切断阀总成 | 最大工作温度为 最大工作压力为 |
Show/hide table
| |
| 图 2 | g03242598 |
Show/hide table
| 项目 | 数量 | 零件 | 技术规格说明 |
| 4 | 2 | 215-2589 螺栓 | 装配前，将 Loctite C5A 铜防咬合剂涂覆到螺纹上。
拧紧至扭矩为 |
| 5 | 1 | 215-2706 空气切断阀组件 | 装配前，将 Loctite C5A 铜防咬合剂涂覆到轴上。 |
| 6 | 1 | 289-9133 车斗 | 装配期间，在阀体和盖之间涂抹红色 Loctite 596。 |
| 7 | 1 | 215-2707 盖 | |
| 8 | 2 | 215-2587 螺栓 | 拧紧至扭矩为 |
| 9 | 1 | 230-4073 电磁阀组件 | 工作电压为 18 至 32 VDC。 |
| 10 | 2 | 215-2588 螺栓 | 装配前，将 Loctite C5A 铜防咬合剂涂覆到螺纹上。
拧紧至扭矩为 |
| 11 | 2 | 215-2587 螺栓 | 装配前，将 Loctite C5A 铜防咬合剂涂覆到螺纹上。
拧紧至扭矩为 |
Caterpillar Information System:
AD55B Underground Articulated Truck Power Train Torque Converter - Disassemble
C3.3B and C3.8 Engines for Caterpillar Built Machines Speed/Timing - Test
986H Wheel Loader Speed Sensor - Test
349F and 352F Excavators Fuses - Replace
910K and 914K Compact Wheel Loaders Plate Locations and Film Locations
D3K2, D4K2, D5K2 Track-Type Tractor TA2 Technical Inspection{1000, 7000, 753T, 7542} D3K2, D4K2, D5K2 Track-Type Tractor TA2 Technical Inspection{1000, 7000, 753T, 7542}
D8R Track-Type Tractor Maintenance Interval Schedule
Electronic Control Module (ECM) on Certain C7.1, C6.6 and C4.4 Machine Engines{1901, 1920} Electronic Control Module (ECM) on Certain C7.1, C6.6 and C4.4 Machine Engines{1901, 1920}
2012/11/12 A New Retention Plate for the Left Hand Fender Group is Now Used on Certain 621H, 623H and 627H Wheel Tractor-Scrapers {7252}
993K Wheel Loader Machine Systems Refrigerant Receiver-Dryer - Remove and Install
C32 Auxiliary Engine Engine Operation with Intermittent Diagnostic Codes
390F Excavator Declaration of Conformity
910K and 914K Compact Wheel Loaders Lubricant Viscosities - Fluids Recommendations
986H Wheel Loader Sensor Signal (Analog, Passive) - Test
910K and 914K Compact Wheel Loaders Engine Crankcase Breather - Replace - and PCV Valve Check
390F Excavator Engine Oil and Filter - Change
910K and 914K Compact Wheel Loaders Cab Air Filter - Clean/Replace
910K and 914K Compact Wheel Loaders Engine Oil Sample - Obtain
390F MHPU Mobile Hydraulic Power Unit Capacities (Refill)
986H Wheel Loader Sensor Signal (PWM) - Test
374F Excavator Capacities (Refill)
C7.1 Industrial Engine Nitrogen Oxide Sensor - Remove and Install - Nitrogen Oxide Sensor for Clean Emissions Module (CEM)
C7.1 Industrial Engine Exhaust Gas Valve (NRS) - Remove and Install
910K and 914K Compact Wheel Loaders Quick Coupler - Lubricate