Parking Brake Manual Release
Show/hide table
 |
|
Personal injury or death can result from a brake malfunction. Do not operate the machine if the parking brake was engaged due to a malfunction of the hydraulic oil system or the service brakes. Correct any problem before attempting to operate the machine. |
Models PDF1-1768 and ; FWL1-950, ; KNP1-213 and ; ERP1-213
- Use wheel blocks to prevent the machine from rolling away when the parking brake is released.
Show/hide table
Illustration 1 g00433600 - Connect the steering frame lock link.
Show/hide table
Illustration 2 g00408620 - Remove the cotter pin (1) from the clevis assembly (2). The assembly should move freely.
- Perform the necessary repairs.
Models PDF1769-Up and ; FWL951-Up, ; KNP214-Up and ; ERP214-Up
Show/hide table
| |
| Illustration 3 | g02950276 |
- Use wheel blocks to prevent the machine from rolling away when the parking brake is released.
- Connect the steering frame lock link.
- Remove the cotter pin from the clevis assembly. The assembly should move freely.
- Perform the necessary repairs.
Caterpillar Information System:
986H Wheel Loader Transmission Oil Level - Check
962H Wheel Loader and 962H Wheel Loader Machine Systems Bucket Control
986H Wheel Loader Machine Systems Instrument Panel
962H Wheel Loader and 962H Wheel Loader Machine Systems Cab - Enclosed ROPS
D5R Track-Type Tractor Machine Systems Radiator Guard and Support
950H and 962H Wheel Loaders Electrohydraulic System Bucket Control - High Lift Machines
D5R Track-Type Tractor Machine Systems Bottom Guard
D5R Track-Type Tractor Hydraulic System C-Frame
D5R Track-Type Tractor Machine Systems Battery and Wiring Group
962H Wheel Loader and 962H Wheel Loader Machine Systems Wiring (Cab)
950H and 962H Wheel Loaders Electrohydraulic System Bucket Control
2012/03/19 An Improved Crankshaft Seal Group is Used on Certain Machines Equipped with C9 and C9.3 {1160, 1161}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169} Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170} Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
988K XE Wheel Loader Window Washer Reservoir - Fill
Thermal Spray Procedures for Torque Converter Output Flange {0679, 3101} Thermal Spray Procedures for Torque Converter Output Flange {0679, 3101}
D5R Track-Type Tractor Model Specific Coolant Information
D5R Track-Type Tractor Lubricant Viscosities
Thermal Spray Procedures for Torque Converter Carrier - Bearing Diameter {0679, 3101, 3135} Thermal Spray Procedures for Torque Converter Carrier - Bearing Diameter {0679, 3101, 3135}
950H Wheel Loader and 962H Wheel Loader Braking and Hydraulic Fan System Hydraulic Fan Speed - Test and Adjust
Thermal Spray Procedures for Pump Gear Drive Inside Diameter{0374, 0599, 0679, 3101} Thermal Spray Procedures for Pump Gear Drive Inside Diameter{0374, 0599, 0679, 3101}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131} Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134} Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Custom Product Support Literature for 980K Wheel Loaders That Are Equipped with the 330-4870 Steel Mill Arrangement {0374, 7000} Custom Product Support Literature for 980K Wheel Loaders That Are Equipped with the 330-4870 Steel Mill Arrangement {0374, 7000}