Vibration Damper and Pulley
拆卸步骤
- 打开门组件 (1) 。
Show/hide table
 | |
| 图 1 | g02822016 |
- 拆下面板组件 (2) 。
Show/hide table
 | |
| 图 2 | g02827502 |
- 打开门组件 (3) 。
Show/hide table
 | |
| 图 3 | g02827507 |
- 卸下面板组件 (4) 。
Show/hide table
 | |
| 图 4 | g02827517 |
- 拆下皮带 (5) 。
Show/hide table
 | |
| 图 5 | g02827579 |
- 拆下螺栓，然后拆下减振器和皮带轮 (6) 。
Show/hide table
 | |
| 图 6 | g02827536 |
安装步骤
- 按与拆卸相反的顺序安装减振器和皮带轮 (6) 。
Caterpillar Information System:
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Assemble - High Flow
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Disassemble - High Flow
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Piston Pump - Assemble - High Flow
924K, 930K and 938K Wheel Loaders Electrohydraulic System Secondary Steering - Test
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Piston Pump - Disassemble - High Flow
924K, 930K and 938K Wheel Loaders Refrigerant Receiver-Dryer
C15 and C18 Engines for Caterpillar Built Machines Water Pump - Remove and Install
D7R Track-Type Tractor Power Train Power Train Oil Pump
C2.6 and C3.3B Engines for Caterpillar Built Machines Fuel Injection Nozzles - Remove and Install - C3.3B and C2.6
924K, 930K and 938K Wheel Loaders Radiator Top Tank
Product Identification Numbers (PIN) Location Guide Excavator (Mini)
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Quick Coupler - Remove and Install
988K XE Wheel Loader Engine Oil Level - Check
924K, 930K and 938K Wheel Loaders Electrohydraulic System Oil Filter (Hydraulic)
924K, 930K and 938K Wheel Loaders C6.6 Engine Supplement Water Temperature Regulator
3516B Generator Set Engines with Dynamic Gas Blending General Information
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Accumulator Manifold and Solenoid Mounting (Pilot Shutoff) - Remove and Install
D6N Track-Type Tractor Engine Supplement Engine - Remove and Install
924K, 930K and 938K Wheel Loaders Refrigerant Accumulator
C2.6 and C3.3B Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
834K Wheel Dozer Engine Oil (High Speed) and Oil Filter - Change - If Equipped
924K, 930K and 938K Wheel Loaders Electrohydraulic System Hydraulic Fan Speed - Calibrate
C2.6 and C3.3B Engines for Caterpillar Built Machines Housing (Front) - Remove and Install - C3.3B