992K Wheel Loader Caterpillar


Automatic Lubrication System Components - Check

Usage:

992K 880

------ WARNING! ------

A pressure hazard is present. Severe personal injury or death can result from removing hoses or fittings that are under pressure. Relieve the pressure in the system before you remove hoses or fittings.


Reference: Before any service work is performed on the lubrication system, refer to Special Instructions, REHS1394 or consult your Cat dealer.



    Illustration 1g01032039
    (A) A-Pin
    (B) B-Pin
    (C) C-Pin
    (E) E-Pin
    (F) F-Pin
    (G) G-Pin
    (H) Pin for Upper Articulation Joint
    (J) Pin for Lower Articulation Joint
    (K) K-Pin
    (L) Steering Cylinder Pins
    (X) Trunnions
    (Y) Y-Pin

  1. Remove any buildup of grease. Check that each pin joint is receiving a fresh supply of grease.

    Reference: If a fresh supply of grease is not present, refer to Special Instructions, REHS1394 for system troubleshooting procedures.

Caterpillar Information System:

992K Wheel Loader and 854K Wheel Dozer Power Train Modulating Valve (Torque Converter Impeller Clutch)
Hydraulic System Modifications To Install A Ripper Anti-Drift Control Kit On Certain D6R Series III and D6T Track-Type Tractor {5050, 5057, 5352, 5356} Hydraulic System Modifications To Install A Ripper Anti-Drift Control Kit On Certain D6R Series III and D6T Track-Type Tractor {5050, 5057, 5352, 5356}
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 2812 - FMI 06
950K and 962K Wheel Loaders Power Train MID 081 - CID 0428 - FMI 04
992K Wheel Loader and 854K Wheel Dozer Power Train Torque Converter Priority Valve
950K and 962K Wheel Loaders Power Train MID 081 - CID 0428 - FMI 03
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 2812 - FMI 05
950K and 962K Wheel Loaders Power Train MID 081 - CID 0427 - FMI 04
950K and 962K Wheel Loaders Power Train MID 081 - CID 0427 - FMI 03
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 2812 - FMI 03
D9T Track-Type Tractor Engine Supplement Engine Side Guards - Remove and Install
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 2811 - FMI 04
D3K2, D4K2 and D5K2 Track-Type Tractors Machine Systems Joystick Control (Bulldozer)
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 2814 - FMI 03
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 2814 - FMI 05
950K and 962K Wheel Loaders Machine Systems Piston Pump (Implement) - Remove and Install
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 2814 - FMI 06
992K Wheel Loader Electrohydraulic System General Information
992K Wheel Loader Electrohydraulic System Connector Locations
854K Wheel Dozer Electrohydraulic System Electrical System Schematic
992K Wheel Loader and 854K Wheel Dozer Power Train Pressure Sensor (Torque Converter Impeller Clutch Oil)
992K Wheel Loader Electrohydraulic System Machine Preparation for Troubleshooting
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 2815 - FMI 03
950K and 962K Wheel Loaders Electrohydraulic System MID 082 - CID 2815 - FMI 05
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.