C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Electric Starting Motor

Usage:

826K 2L3


图 1g02560026

表 1
技术规格,用于 207-1556 电动起动马达总成 
项目  数量  零件  技术规格说明 
6V-8188 螺母  拧紧至扭矩为 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in)。 
250-8279 电磁阀套件  20V 和 25 °C (77 °F) 下的电流消耗:
1. 对于吸合绕组为 57 安培
2. 对于保持绕组为 16 安培
3. 最大额定电流为 850 安培 
小齿轮和壳体之间的间隙为 9.1 mm (0.36 inch)。 
6V-8378 螺母  拧紧至扭矩为 2.6 ± 0.8 N·m (23.0 ± 7.1 lb in)。 
6V-8188 螺母  蓄电池端子螺母(3)最多可使用三个电缆或导线端子。 两个端子最高不低于 0 AWG。
拧紧至扭矩为 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in)。 
6V-8378 螺母  开关端子必须用热收缩管绝缘。 不要使用模压端子。
拧紧至扭矩为 2.6 ± 0.8 N·m (23.0 ± 7.1 lb in)。 
6V-8188 螺母  拧紧至扭矩为 30.5 ± 3.5 N·m (269.9 ± 31.0 lb in)。 
拧紧至扭矩为 8 ± 3 N·m (71 ± 27 lb in)。 
当从小齿轮端观看电起动马达时,马达顺时针旋转。
25 °C (77 °F) 下的无负载状态
1. 转速为 7643 ± 1683 rpm
2. 电流消耗为 76.5 ± 14.5 安培
3. 电压为 23 V 

Caterpillar Information System:

Custom Product Support Literature for 972K Wheel Loaders That Are Equipped with the 348-6587 Steel Mill Arrangement {7000} Custom Product Support Literature for 972K Wheel Loaders That Are Equipped with the 348-6587 Steel Mill Arrangement {7000}
330F MHPU Mobile Hydraulic Power Unit Machine System Pump Coupling
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 0490 - FMI 04
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 0490 - FMI 03
C13 Engines for Caterpillar Built Machines Diesel Particulate Filter
C13 Engines for Caterpillar Built Machines Engine Oil Filter Base
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 0358 - FMI 06
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 0358 - FMI 05
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 0358 - FMI 03
Cat® Grade Control for the D8T and D9T Track-Type Tractors 3D Vertical Guidance
Cat® Grade Control for the D8T and D9T Track-Type Tractors 3D Valve Speed - Set
Cat® Grade Control for the D8T and D9T Track-Type Tractors 3D Text Items - Set
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Speed Sweep - Test
C9.3 Tier 4 Final Engines Engine Oil Filter Base
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 0575 - FMI 03
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 0575 - FMI 04
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 0575 - FMI 08
854K Wheel Dozer and 992K Wheel Loader Power Train Torque Converter - Remove
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 0575 - FMI 13
C175-16 Locomotive Engine Gear Group (Rear)
980K Wheel Loader Machine Systems Brake Accumulator - Remove and Install
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 0600 - FMI 03
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System MID 082 - CID 0600 - FMI 04
994H Wheel Loader Steering System Oil Filter (Steering, Brake Cooler)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.