Cat® Grade Control for Wheel Tractor Scrapers Caterpillar

Brightness (Display and Light Bar) - Set

Usage:

623H DBF

Note: The contents of the "Setup Menu" dialog are configurable on the site. The number of items in the "Setup Menu" may vary depending on the "Operator Configuration" settings. Refer to your supervisor if a specific option is not available.

The "Display and Light Bar Brightness" dialog sets the brightness of the Display and the light bars.

Press the "Menu" key.
From the "Setup Menu-Configuration" dialog, press the up arrow or the down arrow until "Display and Lightbar Brightness" is highlighted.
Press the "OK" key.
The "Display and Light Bar Brightness" dialog appears. Refer to Illustration 1.
The default "Display Brightness" dialog is shown.
Show/hide table

Illustration 1 g02416061
In order to adjust the brightness of the Display, press the "Display" soft key. The field changes to "Display brightness". In order to adjust the brightness of the light bar, press the "Light bar" soft key. In order to adjust the brightness of the keypad, press the "Keypad" softkey.
Do one of the following:
- Press the up arrow or the down arrow in order to increase or decrease the brightness.
- Press the "Set Maximum" in order to select the maximum brightness.
Press the "OK" key in order to save the settings and return to the "Setup Menu-Configuration" dialog. Press the "ESC" key and then press the "OK" key in order to cancel the changes.
Press the "ESC" key in order to exit the "Setup Menu-Configuration" dialog. All changes take effect immediately.

Note: The brightness of the Display may also be changed without entering a menu. Press the "MENU" key and "+" key in order to increase the brightness. Press the "MENU" key and "-" key in order to decrease the brightness.