Fuel Tank (Right Side) - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 138-7575 | Link Bracket | 2 |
Start By:
- Connect the steering frame lock.
- Release the hydraulic system pressure.
Show/hide table
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately. |
- Refer to Operation and Maintenance Manual, "Fuel Tank Water and Sediment - Drain" and Operation and Maintenance Manual, "Capacities (Refill)" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g02332319 - Remove covers (1).
Show/hide table
Illustration 2 g02332335 - Disconnect hose assembly (2) and hose (3).
Show/hide table
Illustration 3 g02332355 - Attach Tooling (A) and a suitable lifting device to right side fuel tank (4). The weight of right side fuel tank (4) is approximately
125 kg (275 lb) .Show/hide tableIllustration 4 g02332373 - Remove four bolts (5) and remove right side fuel tank (4).
- Install right side fuel tank (4) in the reverse order of the removal procedure.
Caterpillar Information System:
D6N Track-Type Tractor Engine Air Filter Primary Element - Clean/Replace
966K Wheel Loader and 972K Wheel Loader Braking and Hydraulic Fan System Oil Coolers and Cooling System Operation
D6N Track-Type Tractor Cooling System Extended Life Coolant - Change
C15 and C18 Engines Coolant Sample (Level 1) - Obtain
Accugrade Software Enabled Attachment Is Difficult to Install on D6N Track-Type Tractor{7220, 7620} Accugrade Software Enabled Attachment Is Difficult to Install on D6N Track-Type Tractor{7220, 7620}
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Control Panel (Air Conditioner and Heater)
2010/11/17 New Bolts and New Hard Washers With Updated Torque Are Now Used to Retain the Elbow to the Hydraulic Tank Group on Certain Wheel Tractor-Scrapers {5057}
992K Wheel Loader Electrohydraulic System Electrohydraulic Control - Mounting Group
C3.4B Engines For Caterpillar Built Machines Engine Design
2010/11/29 Annunciator Film Kit Is Now Available for EMCP 4 On Cat Generator Sets {4490, 7400}
D6N Track-Type Tractor Cooling System Coolant Sample (Level 2) - Obtain
2010/11/11 New Software Is Now Available for Engines on Certain Cat Product {1901, 1902, 7620}
C15 and C18 Engines Engine Air Cleaner Element (Dual Element/Box Type) - Replace
D6N Track-Type Tractor Engine Air Filter Secondary Element - Replace
AD30 Underground Articulated Truck Seat
AD30 Underground Articulated Truck Indicators
D6N Track-Type Tractor Engine Air Precleaner - Clean
C13 Engines for Caterpillar Built Machines Pressure Sensor (ARD Main Fuel)
C13 Engines for Caterpillar Built Machines Pressure Sensor (ARD Pilot Fuel)
966K Wheel Loader and 972K Wheel Loader Braking and Hydraulic Fan System Hydraulic Fan System
D6N Track-Type Tractor Engine Oil and Filter - Change
C4.4 Industrial Engine Exhaust Cooler (NRS) - Test
2010/11/18 The Durability of the Stop and Tail Lamp Group Has Been Improved on Certain Integrated Toolcarriers and Wheel Loaders {1432}
D6N Track-Type Tractor Ether Starting Aid Cylinder - Replace