Piston Motor (Hydraulic Fan) - Disassemble
拆解步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件名称     | 数量     |
A     | 1P-1861     | 挡圈钳     | 1     |
B     | 5P-4808     | 盖     | 2     |
3H-0465 | 推拉器板     | 4     | |
8B-7549 | 拉拔器腿     | 2     | |
169-6969 | 双头螺栓     | 1     | |
8B-7548 | 推拉器工具总成     | 1     | |
8T-1757 | 螺母     | 1     | |
5P-8248 | 硬垫圈     | 1     | |
5P-8247 | 硬垫圈     | 1     | |
2J-3506 | 全螺纹螺母     | 1     | |
C     | 1P-1860     | 挡圈钳     | 1     |
D     | 8H-0663     | 轴承拉拔器总成     | 1     |
开始:
- 拆下活塞马达。 请参考拆解和组装, "活塞马达(液压风扇)- 拆卸"。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
注: 为了便于安装,请在所有部件上做好标记。 拆解部件之前,盖好端口并清理部件外部,以保持部件清洁。
- 拆下螺栓 (1) 和马达头 (2) 。 如有必要,拆下螺塞 (3) 和 O 形密封圈 (4) 。 拆下弹簧 (5) 。 拆下提升阀 (6) 。
Show/hide table
图 1 | g01143652 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 拆下 O 形密封圈 (7) 和板 (8) 。
Show/hide table
图 2 | g02021835 |
- 将马达放置到相对的一侧。 使用工具 (A) 拆下挡圈 (9) 。 拆下盖 (10) 。
Show/hide table
图 3 | g02021853 |
- 从盖 (10) 上拆下密封件 (11) 。
Show/hide table
图 4 | g01143696 |
- 拆下 O 形密封圈 (12) 和垫片 (13) 。
Show/hide table
图 5 | g02021873 |
- 安装工具 (B) 以便从壳体 (15) 上拆下旋转总成 (14) 。
Show/hide table
图 6 | g01143701 |
- 从活塞上拆下活塞筒 (16) 。
Show/hide table
图 7 | g01143703 |
- 从活塞筒 (19) 上拆下弹簧 (17) 和垫片 (18) 。
Show/hide table
图 8 | g01143704 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 从轴上拆下螺钉 (19) 。 从轴上拆下板 (20) 和活塞。
Show/hide table
图 9 | g01143705 |
- 从板 (20) 上拆下销 (21) 和活塞 (22) 。 活塞环不可从活塞分开单独进行维修。
Show/hide table
图 10 | g01143706 |
- 使用工具 (C) 从轴 (24) 上拆下挡圈 (23) 。
Show/hide table
图 11 | g01143707 |
- 使用适当的压具和工具 (D) 从轴 (24) 上拆下轴承 (25) 。
Show/hide table
图 12 | g01143708 |
Caterpillar Information System:
336E Excavator Engine Oil and Filter - Change
336F MHPU Mobile Hydraulic Power Unit Engine Oil Sample - Obtain
D7E Track-Type Tractor Hydraulic, HVAC, and Electrical Systems Electrical Maintenance Guidelines
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System Wiring Harness (Short Circuit) - Test
336F MHPU Mobile Hydraulic Power Unit Engine Oil Level - Check
3500B and 3500C Marine Engines Accessory Drive
D6T Track-Type Tractor Belt - Inspect/Replace
349F and 352F Excavators Engine Air Filter Primary Element - Clean/Replace
Supplemental Parts Information for the USN Seabee 621G MEGA Water Tanker{0374, 0375, 7000, 7405, 7557} Supplemental Parts Information for the USN Seabee 621G MEGA Water Tanker{0374, 0375, 7000, 7405, 7557}
Improved Procedure For Routing The Harness Of The Handle Control Group On The 938H Wheel Loader And The IT38H Integrated Toolcarrier{5705} Improved Procedure For Routing The Harness Of The Handle Control Group On The 938H Wheel Loader And The IT38H Integrated Toolcarrier{5705}
349F and 352F Excavators Cooling System Coolant Sample (Level 1) - Obtain
349F and 352F Excavators Cooling System Coolant Level - Check
D11T Track-Type Tractor Engine Supplement Piston Motor (Hydraulic Fan) - Assemble
Procedure to Install New Plates on the Rear Frame on Certain 651E, 657E, and 657G Wheel Tractor-Scrapers{7050, 7051} Procedure to Install New Plates on the Rear Frame on Certain 651E, 657E, and 657G Wheel Tractor-Scrapers{7050, 7051}
2009/11/09 Torque for the Pressure Switch In the Oil Filter Group Is Now Updated On Certain Cat Product {3004, 3067, 5068}
D6T Track-Type Tractor Brakes, Indicators and Gauges - Test
D6T Track-Type Tractor Cooling System Coolant Sample (Level 1) - Obtain
AD55B Underground Articulated Truck Restricted Visibility
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM MID 049 - CID 0590 - FMI 02
2009/11/05 Engine Oil Pan on C6.6 Engines {1302}
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM MID 049 - CID 0590 - FMI 02
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM MID 049 - CID 0590 - FMI 09
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM MID 049 - CID 0590 - FMI 09
854G and 854K Wheel Dozers and 992G, 992K and 994F Wheel Loaders VIMSTM MID 049 - CID 0590 - FMI 12