Axle - Disassemble - Heavy Duty
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | 1P-5546 | 十字挡块 | 1 |
8B-7550 | 腿 | 2 | |
3H-0465 | 拉拔器盘 | 4 | |
5F-7379 | 顶出螺栓 | 1 | |
4C-5660 | 齿座 | 2 | |
6B-6682 | 螺母 | 2 | |
8T-1757 | 螺母 | 2 | |
9X-8268 | 垫圈 | 2 | |
B | 6V-3009 | 十字挡块 | 1 |
126-7179 | 腿 | 2 | |
126-7181 | 拉拔器盘 | 4 | |
6V-4832 | 螺钉 | 1 | |
8H-0663 | 轴承拉拔器 | 1 | |
6B-6684 | 螺母 | 2 | |
2M-0849 | 垫圈 | 2 |
开始:
- 拆下车桥。
- 拆下 O 形密封圈。 拆下螺塞以排放车桥油。
Show/hide table
图 2 g01053336 - 使用工具 (A) 以将心轴 (1) 从车桥壳 (2) 上松开。
- 由两人拆下车桥壳 (2)。 车桥壳体 (2) 的重量约为
27 kg (60 lb) 。Show/hide table图 3 g02469456 - 从车桥壳 (2) 上拆下垫片 (3)、密封件 (4) 和轴承内圈 (5)。
Show/hide table
图 4 g02475197 - 从车桥壳 (2) 上拆下轴承外圈 (6)。
Show/hide table
图 5 g02469476 - 从心轴组件 (8) 上拆下 Bellville 垫圈和密封圈 (7)。
注: 注意 Bellville 垫圈和密封圈 (7) 的位置以便安装。
Show/hide table图 6 g01328218 Show/hide table图 7 g01328296 - 利用工具 (B) 拆下轴承内圈 (9)。
- 从心轴组件 (8) 上拆下曲径 (10)。
Show/hide table
图 1 | g01328157 |
Caterpillar Information System:
AD55B Underground Articulated Truck Machine Systems Gear Pump (Steering) - Disassemble
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Machine Systems Front Frame to Rear Frame - Connect
AD55B Underground Articulated Truck Machine Systems Gear Pump (Hoist, Brake, and Pilot) - Assemble
Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000} Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000}
973C Track-Type Loader Maintenance Interval Schedule
973C Track-Type Loader Steel Mill Supplement Maintenance Interval Schedule
657G Wheel Tractor-Scraper Auger Hydraulic System Piston Motor (Auger)
953D Track-Type Loader Machine Systems Air Conditioner and Heater Components - Install
953D Track-Type Loader Machine Systems Air Conditioner and Heater Components - Remove
PL61 Pipelayer and D6K Track-Type Tractor Implement System - D6K
Installation of the V-PAT Bulldozer{6079} Installation of the V-PAT Bulldozer{6079}
963D Track-Type Loader Machine Systems Lift Cylinder - Remove and Install
2007/01/22 Improved Auxiliary Water Pumps are Used {1361, 1371}
D11T Track-Type Tractor Machine Preparation for Troubleshooting
906 and 908 Compact Wheel Loaders Machine Systems Gear Pump (Implement) (Steering) (Hydraulic Fan) - Disassemble
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Engine Starting with Jump Start Cables
D6K Track-Type Tractor Machine Systems Joystick Control (Bulldozer) - Remove and Install
906 and 908 Compact Wheel Loaders Machine Systems Gear Pump (Implement) (Steering) (Hydraulic Fan) - Assemble
2006/12/04 New AccuGrade® Software and Components are now available {7220}
D6K Track-Type Tractor Electrohydraulic Power Train Initial Pressure Tests
Installation of the Winch on the D3K, D4K and D5K Track-Type Tractors{5163} Installation of the Winch on the D3K, D4K and D5K Track-Type Tractors{5163}
PL61 Pipelayer and D6K Track-Type Tractor Connector Contact Description
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Axle - Assemble - Heavy Duty
A Hose Fitting on the Ride Control Line May Crack on Medium Wheel Loaders{5004, 5057} A Hose Fitting on the Ride Control Line May Crack on Medium Wheel Loaders{5004, 5057}