Removal Procedure
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 185-3630 | Strap Wrench As | 1 |
Start By:
- Remove the engine side guards from the right side of the machine. Refer to Disassembly and Assembly, "Engine Side Guards - Remove and Install".
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
- Use Tooling (A) to remove engine oil filter (3) .
 | |
| Illustration 1 | g01231016 |
- Remove bolts (1). Remove filter base (2) and the gasket.
Installation Procedure
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 185-3630 | Strap Wrench As | 1 |
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Position filter base (2) and the gasket. Install bolts (1) .
| | |
| Illustration 2 | g01231016 |
- Use Tooling (A) to install engine oil filter (3) .
End By: Install the engine side guards on the right side of the machine. Refer to Disassembly and Assembly, "Engine Side Guards - Remove and Install".