2007/09/03 Caterpillar


Replacement of the 223-3383 Washer Pump As on Certain Motor Graders and Track-Type Tractors {7306}

Usage:

160H 2FM
Motor Grader:
160H (S/N: DBM162-286)
Track-Type Tractor:
D5N (S/N: AKD247-905; AGG111-1065)
D6N (S/N: ALH190-504; AKM314-1008; ALR211-414; ALY260-1115)
Service Magazine SEPD0794, 25 July 2005, "Replacement of the 223-3383 Washer Pump As on Certain Excavators, Motor Graders, and Track-Type Tractors". Disregard this article. See the article that follows.

The 223-3383 Washer Pump As that is installed on the listed machines is prone to failure due to corrosion inside the pump motor. The cause of this problem is a misplaced seal that enables water to penetrate the pump motor.

The assembly process for the 223-3383 Washer Pump As has been modified in order to correct the problem. In addition, a 100% test has been added in order to ensure the integrity of these units. For failure of the 223-3383 Washer Pump As, replace the unit with the same part number.

Caterpillar Information System:

Installation of Factory Ordered High Intensity Discharge Lights{1429, 1434} Installation of Factory Ordered High Intensity Discharge Lights{1429, 1434}
Bench Test Procedure For A 980C Wheel Loader Transmission {3030, 3073, 3101} Bench Test Procedure For A 980C Wheel Loader Transmission {3030, 3073, 3101}
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Front Axle Mounting
D6R Series III and D6T Track-Type Tractors Engine Supplement Water Pump - Install
AD45B Underground Articulated Truck Hydraulic System Relief Valve (Hoist Dual Stage) - Test and Adjust
D6R Series III and D6T Track-Type Tractors Engine Supplement Water Pump - Remove
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Clutch (Reverse, Second)
C32 Marine Engines Rocker Arm and Shaft - Install
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Clutch (Forward High, Forward Low)
Installation Instructions for the Handrail and Step Gp (Kit) (Cab, Front Access) {7254, 7256} Installation Instructions for the Handrail and Step Gp (Kit) (Cab, Front Access) {7254, 7256}
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Clutch (First, Third)
C32 Marine Engines Rocker Arm and Shaft - Remove
953C Track-Type Loader Power Train Power Train Oil System
C15 Petroleum Generator Set Engines Alternator and Regulator
3126B Engine for Caterpillar Built Machines Coolant in Engine Oil
990H Wheel Loader and 844H Wheel Dozer Steering System Steering Control Valve
2005/07/25 Correction to AccuGrade GPS Installation Instructions {7220}
AD45B Underground Articulated Truck Power Train Rear Axle Housing and Differential - Remove
AD45B Underground Articulated Truck Power Train Rear Axle Housing and Differential - Install
AD45B Underground Articulated Truck C18 Engine Supplement Hood (Front) - Remove and Install
AD45B Underground Articulated Truck C18 Engine Supplement Hood (Rear) - Remove and Install
C6.6 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
D6R Series III and D6T Track-Type Tractors Engine Supplement Engine Oil Pan - Remove and Install
C11 and C13 Industrial Engines Engine Oil Filter Base
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.