Cab Air Filter (Pressurized Assembly) - Replace
For machines with the cab pressurizer, the following instructions explain the replacement of the cab air filter.
- Loosen three clamps (1).
Show/hide table
Illustration 2 g01031788 - Position air filter (2) away from hose assembly (3). Refer to Illustration 2.
- Remove air filter (2) from tube assembly (4).
Show/hide table
| |
| Illustration 1 | g01031782 |
- Install new air filter (2) onto tube assembly (4).
Note: Use 207-1601 Rubber Lubricant on the sealing surfaces between the tube (4) and air filter (2) and the hose (3) and air filter (2).
Show/hide table
Illustration 4 g01031782 - Position air filter (2) into hose as (3). Refer to Illustration 4.
- Tighten three clamps (1) to the torque of
4.5 N·m (40 lb in) .
Show/hide table
| |
| Illustration 3 | g01031788 |
Caterpillar Information System:
2006/01/02 Relocation of the Fuel Transfer Pump is Recommended for Certain Applications. {1256}
3406E, C-10, C-12, C-15, C-16 Truck Engines Product Storage
2004/03/22 Special Instruction, REHS1837 , "Bench Test Procedure for Bosch Rexroth A6VM HD Motors" Is Now Available {5058}
844H Wheel Dozer Monitoring System
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Power Train Parking Brake - Remove and Install
Product Link - PL102C System Overview
Replacement of Direct Drive Fan with Rockford Demand Fan{1356, 1359} Replacement of Direct Drive Fan with Rockford Demand Fan{1356, 1359}
963C Track-Type Loader Sound Information and Vibration Information
545 Wheel Skidder Additional Messages
Bench Test Procedure for a 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928HZ, 930G, 930H Wheel Loader and IT28G Integrated Toolcarrier Transmission{3030, 3073, 3139} Bench Test Procedure for a 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928HZ, 930G, 930H Wheel Loader and IT28G Integrated Toolcarrier Transmission{3030, 3073, 3139}
994D Wheel Loader Hydraulic System Bucket Control Pins and Bearings Break-In Procedure - Perform
906 and 908 Wheel Loaders Power Train Parking Brake - Test and Adjust
906 and 908 Wheel Loaders Hydraulic and Steering System Steering System
C15 and C18 Engines for Caterpillar Built Machines Fan Drive
844H Wheel Dozer Equipment Lowering with Engine Stopped
545 Wheel Skidder Safety Messages
D10T Track-Type Tractor Hydraulic System Electrohydraulic Pilot Manifold
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
D11R Track-Type Tractor Operator Controls
2004/04/05 New Bolts Are Now Used on the Lower Articulation Hitch {7057, 7100, 7117}
844H Wheel Dozer Capacities (Refill)
D10R Track-Type Tractor Equipment Lowering with Engine Stopped
D10R Track-Type Tractor Fire Extinguisher Location
844H Wheel Dozer Circuit Breakers - Reset