Bevel Gear and Pinion (Fixed and Oscillating Axles)
Show/hide table
 | |
| Illustration 1 | g02173888 |
(1) Before assembly, lubricate the contact surface of the bolts and the threads of the bolts with 4C-5590 Anti-Seize Compound . Tighten the bolts to a torque of 95 ± 10 N·m (70.0 ± 7.0 lb ft). Then, turn each bolt for a one-half turn.
(2) Torque for the bolt ... 105 ± 20 N·m (77.0 ± 15.0 lb ft)
(3) To secure the bolt, bend the two sides of the lock against the bolt.
Caterpillar Information System:
844 Wheel TractorMachine Systems Main Control Valve - Install
3056E Industrial Engine Crankcase Breather
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Bulldozer Trunnion - Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Bulldozer Trunnion - Remove
844 Wheel TractorMachine Systems Main Control Valve - Remove
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Bulldozer Stabilizer - Install
844 Wheel TractorMachine Systems Pilot Valve (Tilt) - Assemble
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Tractor Machine Systems Bulldozer Stabilizer - Remove
844 Wheel TractorMachine Systems Pilot Valve (Tilt) - Disassemble
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Drive Shaft
844 Wheel TractorMachine Systems Pilot Valve (Tilt) - Install
3056E Industrial Engine Turbocharger
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Tractor Machine Systems Lift Cylinder - Remove
3056E Industrial Engine Water Pump
844 Wheel TractorMachine Systems Main Control Valve - Disassemble
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Power Train Bevel Gear and Pinion (Fixed and Oscillating Axles)
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Tractor Machine Systems Lift Cylinder - Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Power Train Bevel Gear and Pinion (Fixed and Oscillating Axles)
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Tractor Machine Systems Tilt and Tip Cylinder - Remove
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Tractor Machine Systems Tilt and Tip Cylinder - Install
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Water Pump
3126B Engine for Caterpillar Built Machines Cat Data Link Circuit - Test
IT28G Integrated Toolcarrier and 928G Wheel Loader Torque Converter
2002/11/11 A New Block and A Bail Arm are Used on the Lift Arm {1408, 6119}