Electronic Control Module (Power Train) - Flash Program
Perform the following procedure in order to flash program the power train Electronic Control Module (ECM). The power train ECM is flashed in order to upgrade the software. Flash programming of the power train ECM must also be done if the power train ECM has been replaced. The Caterpillar Electronic Technician (ET) contains the program WinFlash. WinFlash is used in order to load software into the ECM. The following procedure is used in order to FLASH software into the power train ECM.
Procedure
- Connect the 7X-1425 Data Link Cable between the 7x-1700 Communication Adapter and the Electronic Technician.
- Connect the 139-4166 Data Link Cable between the 7x-1700 Communication Adapter and the diagnostic connector of the machine.
- Turn the disconnect switch and the key start switch to the ON position.
- Use WinFlash in order to load the software.
- Perform the necessary calibrations. For information on performing calibrations, refer to Testing and Adjusting, "Calibration".
Caterpillar Information System:
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Cooling System Coolant (ELC) - Change
Underground Articulated Trucks Caterpillar Monitoring System Alert Indicator Description
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 1175 - FMI 03
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 0967 - FMI 02
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 0718 - FMI 11
2001/02/12 Special Instruction, REHS0990, "Modify the Underspeed Valve in Order to Optimize the Performance" is now Available {3216}
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System MID 081 - CID 0368 - FMI 05
D6R Series II Track-Type Tractor Caterpillar Monitoring System
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Auto Shift Control - Machines without Integrated Braking System
Underground Articulated Trucks Caterpillar Monitoring System Truck Load Count Mode
Underground Articulated Trucks Caterpillar Monitoring System Calibration Mode
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System MID 081 - CID 0368 - FMI 04
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System MID 081 - CID 0596 - FMI 09
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 1175 - FMI 04
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 1175 - FMI 08
Underground Articulated Trucks Caterpillar Monitoring System Component Description
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Cooling System Coolant Extender (ELC) - Add
Underground Articulated Trucks Caterpillar Monitoring System Main Display Module
Underground Articulated Trucks Caterpillar Monitoring System Quad Gauge Module
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 1227 - FMI 03
D10R, D11R and D11R Carrydozer Track-Type Tractors Implement Electronic Control System MID 082 - CID 1180 - FMI 03
D10R, D11R and D11R Carrydozer Track-Type Tractors Implement Electronic Control System MID 082 - CID 1180 - FMI 05
D10R, D11R and D11R Carrydozer Track-Type Tractors Implement Electronic Control System MID 082 - CID 1180 - FMI 06
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Drive Shaft Spline (Center) - Lubricate