12M, 140M and 160M Motor Graders Hydraulic and Steering System Caterpillar


Sideshift Cylinder

Usage:

12M B92


Illustration 1g02156532

Table 1
Specifications for 249-4116 Sideshift Cylinder Gp 
Item  Qty  Part  Specification Description 
Outer diameter of new piston over two lands 75.7 ± 0.03 mm (2.980 ± 0.001 inch) 
Bore of new cylinder assembly 76.20 ± 0.08 mm (3.000 ± 0.003 inch) 
Outer diameter of new rod 44.400 ± 0.038 mm (1.7480 ± 0.0015 inch) 
Bore of new head over four lands 44.78 ± 0.03 mm (1.763 ± 0.001 inch) 
8T-0667 Bolt  Torque to 900 ± 100 N·m (660 ± 75 lb ft) 
Apply Loctite 609 to the groove for the wiper seal prior to assembly. 
184-9843 Head  Lubricate the threads with clean grease. Torque to 600 ± 130 N·m (440 ± 95 lb ft) 
Lubricate the sealing lips lightly with the lubricant that is being sealed. 

Caterpillar Information System:

3500B and 3500C Generator Set Engines E007 High Aftercooler Temperature Derate
12M, 140M and 160M Motor Graders Hydraulic and Steering System Centershift Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System Blade Tip Cylinder
3500B and 3500C Generator Set Engines MID 036 - CID 0105 - FMI 04 Inlet Manifold Temp Sensor short to ground
3500B and 3500C Generator Set Engines MID 036 - CID 0105 - FMI 03 Inlet Manifold Temp Sensor open/short to +batt
C13 and C15 On-highway Engines Engine Top Speed Is Not Obtained
2005/04/18 Clarification on the Use of Lubricated Camshaft Thrust Washers {1000, 1210}
3500B and 3500C Generator Set Engines System Overview
2005/04/01 New Injectors and New Flash Files are Now in Production {1290, 7620}
G3400 Engines (EIS) Ignition Transformers Primary Circuit
C15 Engine Cooling System Coolant Extender (ELC) - Add
G3400 Engines (EIS) Ignition Shutdown Circuit
3500B and 3500C Generator Set Engines E008 High Aftercooler Temperature Shutdown
C15 Generator Set Engines E009 High Altitude Derate
3500B and 3500C Generator Set Engines E012 High Crankcase Pressure Derate
3500B and 3500C Generator Set Engines E013 High Crankcase Pressure Shutdown
3126B Industrial Engines E015 High Engine Coolant Temperature Derate
3126B Industrial Engines E016 High Engine Coolant Temperature Shutdown
3500B and 3500C Generator Set Engines E021 High Exhaust Temperature Derate
3176C Engines for Caterpillar Built Machines E031 Air Inlet Restriction Derate
3500B and 3500C Generator Set Engines E040 Low Engine Oil Pressure Shutdown
3500B and 3500C Generator Set Engines E043 Low System Voltage Warning
3500B and 3500C Generator Set Engines E095 Fuel Filter Restriction Warning
C7 and C9 Engines for Caterpillar Built Machines E162 High Boost Pressure
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.