910G HYSTAT Wheel Loader Caterpillar

Illustration 1	g00679607

Illustration 2	g00683300

Open the rear door for the engine on the back side of the machine. Use the prop rod to hold the rear door open.

The water separator is located on the left side of the engine compartment on the back side of the machine.

Illustration 3	g00697317

Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information on Containing Fluid Spillage.

1. Loosen the drain valve on the bottom of the water separator. Allow the water and the sediment to drain into a suitable container.

2. Tighten the drain valve.

3. If the engine fails to start, change the fuel filter. If there is a power loss, change the fuel filter.

4. Close the rear door for the engine.