D6F SR, D6G and D6G SR Track-Type Tractors Caterpillar


Engine Valve Lash - Check

Usage:

D6E 2MJ
Refer to Systems Operation, Testing and Adjusting, SENR2823, "3304 and 3306 Engines" for the correct procedures when you check engine valve lash and/or fuel injector timing.

Note: Make sure that qualified service personnel check the injector fuel timing. If an adjustment is necessary, make sure that qualified service personnel adjust the injector fuel timing. Special tools and training are required.

Note: The correct fuel timing specification is shown on the Engine Information Plate. Fuel timing specifications will be different with each engine application and with each power rating.

Consult your Caterpillar dealer for the complete adjustment procedure.

Caterpillar Information System:

D6F SR, D6G and D6G SR Track-Type Tractors Sprocket Hub Bearings - Adjust
3126B and 3126E Truck Engine Main Bearings - Inspect
988G Wheel Loader Electrohydraulic System Solenoid Valve (Pilot Pressure Supply)
3126B Engines Connecting Rod Bearings - Inspect
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0289 - FMI 02 Unfiltered Fuel Pressure misinstalled
988G Wheel Loader Machine Systems Maintenance Free Linkage Seals - Install
988G Wheel Loader Power Train Transmission Planetary - Assemble
836G Landfill Compactor and 834G Wheel Dozer Case Drain Oil Filters - Replace - If Equipped
2000/02/28 New Springs Increase Service Life {1265}
3408E and 3412E Engines for Caterpillar Built Machines E100 Low Engine Oil Pressure Warning
D6F SR, D6G and D6G SR Track-Type Tractors Drive Shaft Universal Joint - Lubricate
D6F SR, D6G and D6G SR Track-Type Tractors Bulldozer Tilt Brace - Lubricate - If Equipped
988G Wheel Loader Electrohydraulic System Pilot Control Actuator
H35E S, H35 S, H45E S, H45S, H55E S, H55S, H65E S and H65S Hydraulic Hammers Visual Inspection
988G Wheel Loader Electrohydraulic System Relief Valve (Main)
3126B Engines Flywheel - Inspect
3406E Engine for Caterpillar Built Machines E190 Engine Overspeed Warning
3508B Engine for D11R Track-Type Tractors E265 User Defined Shutdown
3408E and 3412E Engines for Caterpillar Built Machines E272 Inlet Air Restriction Warning
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pressure - Test
910G HYSTAT Wheel Loader Air Inlet Heater Starting Aid
2000/02/21 Correction to Guideline for Reusable Parts and Salvage Operations, SEBF8277-00 {1201}
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System MID 079 - CID 0070 - FMI 04
988G Wheel Loader Electrohydraulic System Relief Valve (Line)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.