Show/hide table
|
 |
|
| Illustration 1 | g00679181 |
Note: The implement control shutoff is designed to deactivate the control levers. Turn the shutoff counterclockwise to the stop position in order to deactivate the control levers. The action indicator for the implement control will ensure that the control is locked. Deactivate the control levers before you exit the seat or before you service the machine. The control levers should always be deactivated when the machine is left unattended.
Note: You may lower the implements for only a short time after you stop the engine. Refer to the Article "Equipment Lowering with Engine Stopped" in this manual.
Show/hide table
|
 |
|
| Illustration 2 | g00680514 |
The pilot hydraulic control provides infinitely variable speed control for the winch. Slight movement in the REEL IN position or slight movement in the REEL OUT position results in a winch drum speed that is very slow and controlled. As the control is moved further from the center BRAKE ON (neutral) position, the winch drum speed is increased proportionally. When the control is released from the REEL IN position or from the REEL OUT position, the control will return to the BRAKE ON (neutral) position.
Show/hide table
| Brake On (1) (Neutral) - The wire rope should not move. Use this position when you tow the machine. Use this position when you are holding a load and when the winch is not active. |
Show/hide table
| Reel-In (2) - Push the lever forward in order to reel in the wire rope. The wire rope should move toward the winch under power. Release the lever. The lever will return to the BRAKE ON (neutral) position. |
Show/hide table
| Clutch Drum (3) (release position) - Push the control away from the operator in order to release the winch. The control will stay in the DETENTED position. The wire rope will unreel by the weight of the load. The wire rope will unreel as the machine moves away from the load. Pull the control from the DETENTED position. The lever will return to the BRAKE ON (neutral) position. |
Show/hide table
 |
Do not use drum clutch release for controlled reelout of suspended loads. Sudden release of load may result in injury or death and property damage. Use only reelout to lower loads. |
 |
Show/hide table
| Reel-Out (4) - Pull the lever rearward in order to reel out the wire rope. The wire rope will reel out under power. Release the lever. The lever will return to the BRAKE ON (neutral) position. |
