Accessory Drive (Front) - Install
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
B | 1P-0520 | 冲头总成 | 1 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 使用工具 (B) 在接头组件 (4) 内安装唇形密封 (9)。
Show/hide table
图 2 g01126268 - 将 O 形密封圈安装在接头组件 (8) 上。 在 O 形密封圈上涂抹清洁的发动机机油。 将传动齿轮、轴和前接头组件 (8) 作为一个单元安装。 确保传动齿轮轮齿与机油泵和水泵传动齿轮轮齿正确对齐。
Show/hide table
图 3 g01125984 - 安装螺栓 (6)。
- 将密封垫和护盖 (7)安装到接头组件上。
- 将 O 形密封圈安装在接头组件 (4) 上。 在 O 形密封圈和唇形密封上涂覆清洁的发动机机油。 将接头组件 (4)安装到前壳体上并安装螺栓 (2)。
- 将交流发电机皮带轮 (1)置于辅助驱动轴上,然后安装螺栓 (3)。
- 安装密封垫和接头 (5)。
- 向冷却系统加注冷却液。 请参考操作和保养手册, "冷却系统冷却液 - 更换"。
Show/hide table
图 1 | g01142452 |
结束:
- 安装电子控制模块。 请参阅拆解和组装, "电子控制模块 - 拆卸和安装"。
- 安装交流发电机。 请参阅拆解和组装, "交流发电机 - 拆卸和安装"。
Caterpillar Information System:
3508C, 3512C and 3516C Marine Engines Accessory Drive (Front) - Remove
3500B Marine Propulsion Engines Refill Capacities and Recommendations
345C Excavator Machine System Specifications Hydraulic Tank and Filter
2004/12/01 An Improved Engine Mount is Now Used {1152}
2004/12/01 A New Aftercooler Cover is Now Used {1063, 1063}
C11 and C13 Engines Fan Drive
345C Excavator Machine System Specifications Relief Valve (Main)
2004/12/01 A Different Starting Motor is Used {1451}
345 MHPUC Mobile Hydraulic Power Unit Machine System Specifications Relief Valve (Main) - Heavy Lift
C32 Marine Engines Sensors and Electrical Connectors
3508C, 3512C and 3516C Marine Engines Crankshaft Main Bearings - Remove
3508C, 3512C and 3516C Marine Engines Crankshaft Main Bearings - Install
2006/02/01 Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20 Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20 Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
C9 Marine Generator Set Plate Locations and Film Locations
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Hydraulic Tank and Filter
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Filter (Return) - Case Drain Filter
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Hydraulic Oil Cooler
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Turbocharger - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Housing (Front) - Assemble
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Housing (Front) - Disassemble
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Disassemble