Transmission Oil and Scavenge Pump - Disassemble
Disassembly Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-0510     | Driver Group     | 1     |
Start By:
- Remove the transmission oil and scavenge pump. Refer to Disassembly and Assembly, "Transmission Oil and Scavenge Pump - Remove".
- Remove two O-ring seals (1) from manifold assembly (2). Remove four bolts (3) that secure the cover to manifold assembly (2) .
Show/hide table
Illustration 1 | g00540032 |
- Turn over the pump. Remove two bolts (4) that secure cover (5) to manifold assembly (2). Remove cover (5) and the O-ring seal from manifold assembly (2) .
Show/hide table
Illustration 2 | g00540034 |
- Remove two dowel pins (6) from body assembly (7). Remove body assembly (7) from manifold assembly (2). Remove two gears (8) from two gear assemblies (9) .
Show/hide table
Illustration 3 | g00540036 |
Note: Mark the position of the gears on the gear assemblies for assembly purposes.
- Remove O-ring seal (10) from cover assembly (11). Remove key (12) from gear assembly (9). Remove two bolts (13) that secure cover assembly (11) to manifold assembly (2). Remove cover assembly (11) from manifold assembly (2) .
Show/hide table
Illustration 4 | g00540037 |
- Remove two O-ring seals (14) from cover assembly (11). Use Tooling (A) to remove two bearings (15) from cover assembly (11) .
Show/hide table
Illustration 5 | g00540038 |
- Remove two gear assemblies (9) from manifold assembly (2) .
Show/hide table
Illustration 6 | g00540040 |
Note: Mark the position of the gear assemblies for assembly purposes.
- Use Tooling (A) to remove two bearings (16) from manifold assembly (2). Remove two dowel pins (17) from manifold assembly (2) .
Show/hide table
Illustration 7 | g00540041 |
Caterpillar Information System:
611 Wheel Tractor-Scraper Power Train Transmission Oil and Scavenge Pump - Install
611 Wheel Tractor-Scraper Power Train Transmission Oil and Scavenge Pump - Remove
545 Wheel Skidder Hydraulic and Steering System Visual Inspection
515 Wheel Skidder and 525 Wheel Skidder Transmission Control
545 Wheel Skidder Machine Systems Bank Valve (Four) (Grapple) - Remove
963C Track-Type Loader Machine Systems Electronic Control Module (ECM) Manifold - Remove and Install
3046 Engine For Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
623F Wheel Tractor-Scraper Machine Systems Service Brakes - Install
623F Wheel Tractor-Scraper Machine Systems Service Brakes - Remove
902 and 906 Compact Wheel Loaders Engine Supplement Engine - Remove
545 Wheel Skidder Power Train Output Transfer Gears
545 Wheel Skidder Power Train Clutch (First and Third)
611 Wheel Tractor-Scraper Power Train Transmission Oil and Scavenge Pump - Assemble
515 Wheel Skidder and 525 Wheel Skidder Hydraulic Retrieval Device (HRD) Operation
D9R Track-Type Tractor Power Train Relief Valve (Torque Converter Outlet)
826G Landfill Compactor, 825G Soil Compactor and 824G Wheel Dozer Power Train Fixed Axle (Front) - Remove and Install
826G Landfill Compactor, 825G Soil Compactor and 824G Wheel Dozer Power Train Oscillating Axle (Rear) - Remove and Install
Adjustment of the Hydraulic Electronic Controls{5702} Adjustment of the Hydraulic Electronic Controls{5702}
963C Track-Type Loader Machine Systems Hydraulic Charge Pressure Relief Valve - Remove and Install
515 Wheel Skidder and 525 Wheel Skidder Alternate Exit
3408E and 3412E Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
994D Wheel Loader Air Tank Moisture and Sediment - Drain
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Sensor - Remove and Install
834G Wheel Dozer and 836G Landfill Compactor Power Train Torque Converter (Lockup)