Selector Valve (Torque Converter Lockup Clutch) - Disassemble
Disassembly Procedure
Start By:
- Remove the selector valve. Refer to Disassembly and Assembly, "Selector Valve (Torque Converter Lockup Clutch) - Remove". The information is in this manual.
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose of all fluids according to local regulations and mandates. |
- Remove two bolts (1), cover (2) and O-ring seal (3) from valve assembly (4) .
Show/hide table
 | |
| Illustration 1 | g00470797 |
- Remove spool (5), spool (6), spring (7) and guide (8) from valve assembly (4). Remove O-ring seal (9) from spool (5) .
Show/hide table
 | |
| Illustration 2 | g00470799 |
- Remove two bolts (10), cover (11) and O-ring seal (12) from valve assembly (4) .
Show/hide table
 | |
| Illustration 3 | g00470801 |
- Remove spring (13) and spacer (14) from valve assembly (4) .
Show/hide table
 | |
| Illustration 4 | g00471050 |
Caterpillar Information System:
953C Track-Type Loader Machine Systems Refrigerant Compressor - Remove and Install
992G Wheel Loader Machine Systems Piston Pump (Fixed Displacement) - Assemble
992G Wheel Loader Machine Systems Piston Pump (Fixed Displacement) - Disassemble
D8R Track-Type Tractor Engine Air Filter Primary Element - Clean/Replace
953C Track-Type Loader Machine Systems Air Conditioner Belt - Remove and Install
631E Series II Wheel Tractor-Scrapers Auger Hydraulic System Oil Filter - Replace
980G Wheel Loader Hydraulic System Vane Pump (Implement and Hydraulic Fan)
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Visual Inspection
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Machine Preparation for Troubleshooting
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydrostatic System - Test and Adjust
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train General Troubleshooting Information
D7R Track-Type Tractor Hydraulic System Ripper Lift Cylinder
D7R Track-Type Tractor Hydraulic System Main Relief Valve
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Pilot Valve (Joystick)
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Cooler - Disassemble
953C Track-Type Loader Machine Systems Refrigerant Condenser - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Cooler - Assemble
953C Track-Type Loader Machine Systems Refrigerant Condenser Fan and Fan Motor - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines Basic Engine
953C Track-Type Loader Machine Systems Refrigerant Evaporator Coil - Remove
980G Wheel Loader Steering System Temperature Sensor (Hydraulic Oil)
3406E and 3456 Engines for Caterpillar Built Machines Cooling System
980G Wheel Loader Hydraulic System Piston Motor (Hydraulic Fan)
3406E and 3456 Engines for Caterpillar Built Machines General Information