928G Wheel Loader Caterpillar


Transmission Neutralizer Override Control

Usage:

928G 6XR



Illustration 1g00451979

The transmission neutralizer switch is located under the cab on the right side of the machine.




Illustration 2g00103747

Loosen the two bolts (1) that hold the bracket (2) for the transmission neutralizer switch. Slide the bracket to the desired position. Slide the bracket downward in order to decrease service brake travel before the neutralizer switch is enabled. Slide the bracket upward in order to increase the service brake travel before the neutralizer switch is enabled. Tighten the bolts.

Note: For machines that are equipped with a direction control switch, the forward and the reverse indicator lights will turn off when the brake pedal is pushed and the transmission is neutralized.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.