Differential and Final Drive Oil - Change
Wipe the openings around the covers and the surfaces before you fill the differential and final drives.
- Remove the differential drain plug and allow the oil to drain into a suitable container.
Note: Always discard drained fluids according to local regulations.
Show/hide table
Illustration 1 | g00102112 |
Show/hide table
Illustration 2 | g00102114 |
- Position each tractor wheel so that the drain plug on each wheel is at the lowest point. Remove the drain plugs and allow the oil to drain into a suitable container.
Show/hide table
Illustration 3 | g00102117 |
- Clean the drain plugs and install the drain plugs.
- Remove the filler cap.
Show/hide table
Illustration 4 | g00102116 |
- Fill the differentials and the final drives. See Operation and Maintenance Manual, "Capacities (Refill)".
- Position each tractor wheel so that the plug on each wheel is in the correct position. Remove the plugs. Fill the final drives.
Show/hide table
Illustration 5 | g00102117 |
- Clean the filler plug. Install the filler plug.
- Clean the filler cap and install the filler cap.
- Maintain the differential oil level between the marks on the dipstick.
Show/hide table
Illustration 6 | g00102118 |
Caterpillar Information System:
651E Wheel Tractor-Scraper Differential and Final Drive Breather - Clean
992G Wheel Loader Electrohydraulic System Piston Pump (Implement, Fixed Displacement)
651E Wheel Tractor-Scraper Cushion-Hitch Accumulator - Check
651E Wheel Tractor-Scraper Cooling System Relief Valve - Clean
Installation Of Brake Oil Cooler Kit{1365} Installation Of Brake Oil Cooler Kit{1365}
992G Wheel Loader Electrohydraulic System Piston Pump (Implement, Variable Displacement)
561M Pipelayer Tracks
561M Pipelayer Track Rollers - Single Flange and Double Flange
651E Wheel Tractor-Scraper Cooling System Pressure Cap - Clean/Replace
651E Wheel Tractor-Scraper Cooling System Level - Check
651E Wheel Tractor-Scraper Cooling System Coolant (DEAC) - Change
120H and 135H Motor Graders Tire Inflation with Nitrogen
D6M Track-Type Tractor Hydraulic System Case Drain Filter - Replace
651E Wheel Tractor-Scraper Differential and Final Drive Oil Level - Check
D6M Track-Type Tractor Power Train Platform
515 Wheel Skidder and 525 Wheel Skidder Conventional Coolant/Antifreeze Cooling System Maintenance
D5M Track-Type Tractor Power Train Fender
561M Pipelayer Drawbar
651E Wheel Tractor-Scraper Draft Arm Flange Bolts - Check
631E Series II Wheel Tractor-Scrapers Draft Arm Wear Plates - Check/Adjust
992G Wheel Loader and 854G Wheel Dozer Steering System Check Valve (Steering Pilot)
992G Wheel Loader and 854G Wheel Dozer Steering System Relief Valve (Steering Cylinder Crossover)
561M Pipelayer Idlers (Track)
992G Wheel Loader and 854G Wheel Dozer Steering System Relief Valve (Secondary Steering)