854G Wheel Dozer Caterpillar


Rollover Protective Structure (ROPS) - Inspect

Usage:

854G 1JW


注意

不要试图把滚翻保险结构架 (ROPS) 拉直。 不要用加强板焊在滚翻保险结构架 (ROPS)上进行修理。

如果在滚翻保险结构架(ROPS)的焊缝,铸件或任何金属面上出现裂纹,咨询卡特彼勒代理进行维修。





图 1g00110025

把翻滚保护结构架(ROPS)两侧的监视板卸下。

检查ROPS上有无损伤,螺栓有无松动或损坏。 对于损坏或丢失的螺栓必须要用原装机的零件更换。 拧紧螺栓,扭矩至1600 ± 200 N·m (1200 ± 150 lb ft)。

注: 安装前,先在螺栓的螺纹面上涂油。 如果不涂上油,螺栓的扭矩上紧力可能不正确。

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.