1999/02/15 Caterpillar


Correction To Operation & Maintenance Manual, SEBU6492-02 {0374,0375,7490}

Usage:


950F Series II (4DJ, 5SK, 8TK, 2LM) Wheel Loaders

Reference: Service Manual Module, SEBU6492-02, Operation & Maintenance Manual, 950F Series II Wheel Loader; Page 23, "Warning Category 1". This module is found in Service Manual, SENR4920, 950F & 950F Series II Wheel Loaders.

Add the following Secondary Steering alert indicator information to Page 23.


Secondary Steering Indicator

Secondary Steering (If Equipped) - The alert indicator will flash if there is a loss of secondary steering oil flow.

The flashing indicator notifies the operator that if the primary steering system also failed at this time, there is no secondary steering system for backup.

Immediately pull the machine to a convenient stop and shut the engine off.

NOTE: Wheel Loaders are equipped with a ground driven secondary steering pump. It is normal for the alert indicator to flash after 12 seconds when the machine is stopped.

Caterpillar Information System:

1999/02/15 New Thrust Washer Improves Service Life Of Differential Group {3258}
1999/02/15 Correction To Operation & Maintenance Manual SEBU6955 {0374,0375,7560}
1999/02/15 Bolts, Washer, And Spacers Grouped Into Fastener Groups In Engine Cylinder Head Groups {1100}
1999/02/15 Electrical System Schematic, SENR1864, Available {1400}
1999/02/08 New VIMS Application Guide Available {7601,0374}
1999/02/08 Correct Seal Usage Improves Service Life {7555}
1999/02/08 New Engine Pressure Sensors Available {1916,1917,1922,1923,1924}
1999/02/08 Valve Bodies Now Stress Relieved To Improve Service Life {3167}
1999/02/08 Special Instruction, "Installation Instructions For Improved Ride Control System", Now Available {0374,1408,4812,5051,5057,5077,5479,7332}
1999/02/08 Correction To Testing And Adjusting Manual, RENR2146-01 {0374,1435,5700}
1999/02/01 Procedure For Assembly And Installation Of Conventional Duo-Cone Seals Is Now Available{7561}
1999/02/01 Bearing Specifications For 3408E And 3412E Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Drive Group{1714}
1999/02/15 Correction To Disassembly And Assembly Manual, RENR2116 {0374,1387}
1999/02/15 New Auxiliary Drive Coupling Group Improves Service Life {3252}
1999/02/15 100 cm Of 5P-1471 Hose Required For each 994 Wheel Loader Dust Ejector {1068}
1999/02/15 New Weld Procedures On 994 Wheel Loader Buckets Increase Service Life {6101}
1999/02/15 Rework Procedure Available To Upgrade Differential Case Assembly {3258}
1999/02/15 Air Conditioning And Heater System Updates Improve Operation And Reliability {7304,7309,7337,7343}
1999/02/15 New Brake Disc Wear Specifications {4250}
1999/02/22 Improved Radiator Cores Now Available {1353}
1999/02/22 Improved Hydraulic Accumulator Mounting Clips Available {5077}
1999/02/22 Engine Control Axle Protection Override {1902}
1999/02/22 Correction To Service Brake Disc Information {4250,4255,7473}
1999/02/22 Shielded Metal Arc Welding And Flux Cored Arc Welding Information {0679}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.