Product Storage
If the engine will not be started for several weeks, the lubricating oil will drain from the cylinder walls and from the piston rings. Rust can form on the cylinder liners. Rust will increase engine wear and rust will reduce the service life of the engine.
To help prevent excessive engine wear, use the following guidelines:
- Follow the instructions in the Special Instruction, SEHS9031, "Storage Procedure For Caterpillar Products" in order to prepare the engine for storage.
- If freezing temperatures are expected, check the cooling system for adequate protection against freezing. See this Operation and Maintenance Manual, "Refill Capacities and Recommendations" (Maintenance Section).
If an engine is out of operation and if use of the engine is not planned, special precautions should be made. If the engine will be stored for more than one month, a complete protection procedure is recommended.
For information on storing the marine transmission, refer to the recommendations that are provided by the OEM of the marine transmission.
Caterpillar Information System:
345C Excavator Monitoring System
3612 and 3616 Fast Vessel Engines Product Description
C-15 Petroleum Engine Model View Illustrations
SR4 and SR4B Generators and Control Panels Safety Messages
SCJ and 8SC Series Alternators Normal Operation
3126B Marine Engines Engine Pressure Sensor Open or Short Circuit - Test
C13, C15, and C18 Generator Set Engines Housing (Front)
C13, C15, and C18 Generator Set Engines Engine Oil Pan
SCJ and 8SC Series Alternators General Information
G3600 Engines Refill Capacities and Recommendations
3126B Marine Engines E100 Low Engine Oil Pressure Warning
G3512E Generator Set Engines Engine Oil Pump
C15 and C18 Petroleum Generator Sets Product Storage
SCJ and 8SC Series Alternators Component Description
3412E, C30 and C32 Marine Engines Injector Solenoid Circuit - Test
3054 and 3056 Industrial and Generator Set Engines Balancer - Remove - If Equipped
3054 and 3056 Industrial and Generator Set Engines Balancer - Install - If Equipped
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Current - Calibrate - Field Coil Current
C-10 and C-15 Petroleum Engines Excessive Black Smoke
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Excessive Engine Oil Consumption
3126B Petroleum Engine Noise Coming from Cylinder
C13, C15, and C18 Generator Set Engines Electronic Control System Components
C-15 Petroleum Engine Monitoring System
C-15 Petroleum Engine Speed Sensing Loss Alarm