Engine Oil Filter Base - Assemble
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 安装柱塞 (6)。
- 安装弹簧 (5)。
- 将盖 (4) 安置在发动机机油滤清器底座 (3) 上，安装螺栓。
- 将密封垫 (10) 和接头 (7) 安置在发动机机油滤清器底座 (3) 上，安装螺栓 (9)。
- 将密封垫 (2) 和盖 (1) 安置在发动机机油滤清器底座 (3) 上，安装螺栓 (8)。
Show/hide table
| |
| 图 1 | g01115279 |
Show/hide table
 |
|
弹簧压缩零件如果安装不当，会伤害人体。 为避免伤害，遵照出版的装配程序，并穿上保护装备。 |
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
C9 Marine Auxiliary and Marine Generator Set Engines Engine Pressure Sensor Open or Short Circuit - Test
C32 Marine Engines Engine Design
C9 Marine Auxiliary and Marine Generator Set Engines Electrical Power Supply Circuit - Test
EMCP3 Discrete Input/Output Module
797 Off-Highway Truck Braking System Relief Valve (Brake Oil Cooler)
C12 Marine Engines Reference Material
C12 Marine Engines Plate Locations and Film Locations
C12 Marine Engines Safety Messages
EMCP3 Diagnostic Trouble Code List
2004/01/01 Improved Flash Files are Available {7620}
Installation of the 246-3256 Parts Kit (TACHOMETER) {7450, 7462, 7497} Installation of the 246-3256 Parts Kit (TACHOMETER) {7450, 7462, 7497}
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Filter Base - Install
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
C32 Marine Engine Air Lines
3406E and C15 Marine Engines Fuel System
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
C15 and C18 Engines for Caterpillar Built Machines Engine Oil Cooler - Install
C9 Marine Auxiliary and Marine Generator Set Engines Engine Temperature Sensor Open or Short Circuit - Test
C32 Marine Engine Diagnostic Flash Code Retrieval
2003/12/01 Uninterruptible Power Supply (UPS) Flywheel Bearing Upgrade {7551}
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
C15 Generator Sets Walk-Around Inspection
C18 Marine Auxiliary Engines System Configuration Parameters