918F WHEEL LOADER POWER TRAIN Caterpillar

(1) Torque for eight bolts ... 530 ± 70 N·m (390 ± 50 lb ft)

(2) Torque for thirty two bolts ... 300 ± 40 N·m (220 ± 30 lb ft)

(3) Torque for two fittings ... 11 ± 4 N·m (97 ± 35 lb in)

(4) Torque for fitting ... 13 ± 4 N·m (115 ± 35 lb in)

(5) Torque for three plugs ... 45 ± 6 N·m (33 ± 4 lb ft)

(6) Torque for plug ... 45 ± 6 N·m (33 ± 4 lb ft)

(7) Rubber toric seals and all surfaces in contact with them must be clean and dry at assembly. Put a thin layer of oil on the surfaces of the metal seals that are in contact just before installation. The metal seal must be assembled square with the bore, and rubber toric seals must not be bulged or twisted.

(8) Torque for ten bolts ... 120 ± 20 N·m (88 ± 15 lb ft)