Belt Tensioner
Show/hide table
图 1 | g01181614 |
(1) 安装支架
(2) 皮带不在张紧装置上时张紧装置处在自由位置。 从自由位置到 30 度角旋转张紧装置要求的扭矩 ... 58.8 ± 5.9 N·m
(43 ± 4 lb ft)
Caterpillar Information System:
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Service Brake Pedal Position (Switch 1) Circuit - Test
C1.5 and C2.2 Generator Sets Voltage Regulators
2003/02/03 Special Instruction, REHS1238, "Obtaining Factory Passwords and Software Enabled Attachments" is Available {7610}
3054E Industrial Engine Fuel Priming Pump and Fuel Filter Base - Remove and Install
3054E Industrial Engine Piston Cooling Jets - Remove and Install
320B, 320B L and 320B N Excavators Swing Drive Oil Sample - Obtain
C13 and C15 Engines for Combat and Tactical Vehicles Remote PTO Accelerator Position Sensor Circuit - Test
3054E Industrial Engine Crankshaft Front Seal - Install
3054E Industrial Engine Crankshaft Front Seal - Remove
C13, C15, and C18 Tier 4 Final Engines Housing (Front)
3054E Industrial Engine Crankshaft Pulley - Remove and Install
C13 Engine for Combat and Tactical Vehicles Flywheel Housing
3054E Industrial Engine Engine Oil Filter Base - Remove and Install
3054E Industrial Engine Engine Oil Cooler - Remove
3054E Industrial Engine Engine Oil Cooler - Install
C13, C15, and C18 Tier 4 Final Engines Water Pump
3054E Industrial Engine Water Pump - Remove and Install
Supplement to the Operation and Maintenance Manual{0707} Supplement to the Operation and Maintenance Manual{0707}
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Tachometer Circuit - Test
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Two Speed Axle Switch Circuit - Test
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Vehicle Speed and Speedometer Circuit - Test
C11, C13 and C15 On-highway Engines System Overview
C18 Generator set and C18 Marine Engines Auxiliary Water Pump - Disassemble - Type 1
C18 Generator set and C18 Marine Engines Auxiliary Water Pump - Assemble - Type 1