Introduction
Usage:
The specifications in this book are given on the basis of information that was current at the time the book was written. These specifications give the torques, operating pressures, measurements of new parts and other items. When the word "permissible" is used in the description, the specification value given is the "maximum or minimum" normally permitted before adjustment, repair and/or new parts are needed. Make a comparison of the measurements of a worn part with the specifications of a new part to find the amount of wear. The wear factor is not the only basis for the replacement of parts. The expected service life of the worn part is a factor. A part that is worn can be safe to use if an estimate of the remainder of its service life is good. When a disassembly is made for the purpose of reconditioning, the recommendation is the replacement of parts not completely worn out if a short service life is expected.
NOTE: For Systems Operation and Testing and Adjusting, make reference to 931 POWER TRAIN, Form No. REG01325.
Caterpillar Information System:
931 POWER SHIFT TRANSMISSION Testing And Adjusting
931 TRACK-TYPE LOADER POWER TRAIN Testing And Adjusting
931 TRACK-TYPE LOADER POWER TRAIN Systems Operation
POWER SHIFT TRANSMISSION Testing And Adjusting
POWER SHIFT TRANMISSION (814) Testing And Adjusting
POWER SHIFT TRANSMISSION FOR USE IN SERVICE M Testing and Adjusting
D7F TRACTOR HYDRAULICS Mounting Brackets For Ripper
D7F TRACTOR HYDRAULICS Cutting Edges And End Bits (7A, 7S and 7U Bulldozers)
D7F TRACTOR HYDRAULICS Push Arm And Brace Group
D7F TRACTOR HYDRAULICS Filter
D7F TRACTOR HYDRAULICS Quick Drop Valve (5J3863)
D7F TRACTOR HYDRAULICS Hydraulic Cylinders
931 TRACK-TYPE LOADER POWER TRAIN Oil Pump For The Transmission (1P4165)
931 TRACK-TYPE LOADER POWER TRAIN Transmission (2P2945)
931 TRACK-TYPE LOADER POWER TRAIN Hydraulic Controls (1P571)
931 TRACK-TYPE LOADER POWER TRAIN Pressures For The Hydraulic Controls
931 TRACK-TYPE LOADER POWER TRAIN Lubrication Relief Valve (9S6979)
931 TRACK-TYPE LOADER POWER TRAIN Control Linkage For Transmission
931 TRACK-TYPE LOADER POWER TRAIN Universal Joint
931 TRACK-TYPE LOADER POWER TRAIN Bevel Gear And Pinion
931 TRACK-TYPE LOADER POWER TRAIN Bevel Gear And Pinion Shaft Free Movement (Backlash)
931 TRACK-TYPE LOADER POWER TRAIN Brake Adjustment
931 TRACK-TYPE LOADER POWER TRAIN Steering Clutch Adjustment
931 TRACK-TYPE LOADER POWER TRAIN Steering Clutch