Engine Oil Pan
Show/hide table
Illustration 1 | g00820013 |
(1) Gasket
(2) Engine oil pan
(3) Washer
(4) Tighten the setscrews for the engine oil pan to the following torque.
- ...
11 N·m (8 lb ft)
(5) Tighten the drain plugs of the engine oil pan to the following torque. ...
Oil Suction Tube and Oil Strainer
Show/hide table
Illustration 2 | g00820021 |
(1) O-ring
(2) Oil suction tube
(3) Tighten the bolts for the oil strainer to the following torque. ...
(4) Strainer
Note: Install a new O-ring (1) in the hole of the cylinder block when the oil suction tube is removed or replaced.
Caterpillar Information System:
G3520B Engines Event Codes
G3520B Engines MID 111 - CID 1550 - FMI 05 Cyl #20 Exhaust Port Temp Sensor open circuit
G3520B Engines MID 111 - CID 1549 - FMI 05 Cyl #19 Exhaust Port Temp Sensor open circuit
G3520B Engines MID 111 - CID 1548 - FMI 05 Cyl #18 Exhaust Port Temp Sensor open circuit
G3520B Engines MID 111 - CID 1547 - FMI 05 Cyl #17 Exhaust Port Temp Sensor open circuit
G3520B Engines MID 111 - CID 1550 - FMI 04 Cyl #20 Exhaust Port Temp Sensor short to ground
G3520B Engines MID 111 - CID 1549 - FMI 04 Cyl #19 Exhaust Port Temp Sensor short to ground
G3520B Engines MID 111 - CID 1548 - FMI 04 Cyl #18 Exhaust Port Temp Sensor short to ground
G3520B Engines MID 111 - CID 1547 - FMI 04 Cyl #17 Exhaust Port Temp Sensor short to ground
G3520B Engines MID 111 - CID 1550 - FMI 03 Cyl #20 Exhaust Port Temp Sensor short to +batt
G3520B Engines MID 111 - CID 1549 - FMI 03 Cyl #19 Exhaust Port Temp Sensor short to +batt
G3520B Engines MID 111 - CID 1548 - FMI 03 Cyl #18 Exhaust Port Temp Sensor short to +batt
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Water Temperature Regulator
G3520B Engines E004 Engine Overspeed Shutdown
Alternator - Delco 27SI General Information
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Cylinder Block
G3520B Engines E226 Driven Equipment Not Ready
G3520B Engines E242 Engine Overload
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Crankshaft
Alternator - Delco 27SI Normal Operation
G3520B Engines E867 Improper Gas Flow Control Valve Response
G3520B Engines E868 Gas Flow Control Valve Malfunction
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Steering Cylinder
Alternator - Delco 27SI Component Description