Gear Group (Rear)
Show/hide table
图 1 | g00938824 |
(2) 6EL1465 垫片组的厚度 ...
根据需要添加垫片,以便获得正确的
(3) 将八个螺栓拧紧至以下扭矩 ...
(4) 将两个螺栓拧紧至以下扭矩 ...
(5) 将四个螺栓拧紧至以下扭矩 ...
(6)耐磨套筒
清洁套筒内径和曲轴外径并将 4C-9500 快速固化底漆涂在上面。 将 4C-9507 锁固胶涂抹在曲轴外径上。 将套筒安装到曲轴上。
Caterpillar Information System:
G3520B Engines System Configuration Parameters
G3600 Engines Engine Oil Pump
G3520C and G3520E Generator Set Engines Factory Passwords
G3520C and G3520E Generator Set Engines Customer Passwords
G3520B Engines Programming Parameters
G3600 Engines Engine Oil Pump
G3520B Engines Engine Monitoring System
3306B Generator Set Gauges and Indicators
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Reference Information
3306B Generator Set Plate Locations and Film Locations
3306B Generator Set Specifications
3306B Generator Set Product Description
G3520B Engines Replacing the ECM
G3520B Engines Replacing the ITSM
G3606 and G3608 Engines Electrohydraulic Oil Filter
G3520B Engines Driven Equipment
G3520B Engines Electrohydraulic System Oil Pressure (Low)
G3520B Engines Engine Cranks but Will Not Start
G3520B Engines Engine Shutdown without a Diagnostic Code
G3520B Engines Engine Starts but Stalls Immediately
G3516B Engines Engine Timing Does Not Match Programmed Timing
G3520B Engines Gas Temperature (High)
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Injection Pump
G3520B Engines Intermittent Engine Shutdown