Engine Identification
Caterpillar engines are identified with serial numbers, with performance specification numbers, and with arrangement numbers. In some of the cases, modification numbers are used. These numbers are shown on the Serial Number Plate and the Information Plate that are mounted on the engine.
Caterpillar dealers need these numbers in order to determine the components that were included with the engine. This permits accurate identification of replacement part numbers.
Serial Number Plate
Illustration 1 | g00899101 |
(1) Serial number plate |
The Serial Number Plate is on the left side of the cylinder block near the rear of the engine.
Illustration 2 | g00123229 |
Typical Serial Number Plate |
The following information is stamped on the Serial Number Plate: engine serial number, model and arrangement number.
Information Plate
Illustration 3 | g00899126 |
(1) Information plate |
The Information Plate is located on the valve cover. The following information is stamped on the Information plate:
- Maximum altitude for engine
- Horsepower
- High idle
- Full load RPM
- Fuel settings
- Other information
Illustration 4 | g00755014 |
Typical information plate |
Generator Identification
The generator identification and information plate is located on the left side of the generator.
When service is required, the information that is given on this plate should be used. The generator identification and information plate includes the following information: serial number, model number and the rating of the generator set. The generator set consists of the engine and generator. All pertinent generator data is also included on the plate in order to provide the information that is necessary to order parts.
Illustration 5 | g00572840 |
Generator Identification Plate |
Illustration 6 | g00601027 |
Serial Number Plate |
Output Lead Wiring
All generator lead wiring information can be found on a decal that is located on the side panel of the generator's terminal box. If the generator is equipped with a circuit breaker, the decal may be found on the sheet metal of the circuit breaker panel.