Vibration Damper and Pulley
Show/hide table
| |
| Illustration 1 | g00953667 |
|
Rear mounted vibration damper | |
Note: Apply 9S-3263 Thread Lock Compound to the bolts that fasten the rear mounted vibration damper.
(1) Crankshaft
(2) Vibration damper
(3) Crankshaft pulley
(4) Tighten the bolts evenly to the following torque. ...
Note: Recheck the torque of the bolts (4) twice.
(5) bolts
- Tighten the rear mounted "M8" bolts that fasten the crankshaft pulley to the vibration damper to the following torque. ...
35 N·m (26 lb ft) - Tighten the rear mounted "M10" bolts that fasten the crankshaft pulley to the vibration damper to the following torque. ...
65 N·m (48 lb ft) - Tighten the rear mounted "M10" bolts that fasten the crankshaft pulley to the vibration damper to the following torque. ...
Show/hide table
| |
| Illustration 2 | g00951990 |
|
Front mounted vibration damper | |
(6) Tighten the front mounted "M12" bolts to the following torque. ...
Caterpillar Information System:
G3600 Engines Pressure Switch - Electrohydraulic
K65-12B Voltage Regulator Voltage Regulator - Test
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0566 - FMI 07 (for MUI Engines)
K65-12B Voltage Regulator Voltage Adjustment Range - Calibrate
G3500B Engines Humidity Sensor - Inlet Air
K65-12B Voltage Regulator Knee Frequency - Adjust
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0441 - FMI 12 (for MUI Engines)
K65-12B Voltage Regulator Unstable Voltage
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0334 - FMI 04 (for EUI Engines)
3412E, C30 and C32 Marine Engines Switch Circuits - Test
3412E, C30 and C32 Marine Engines Unit Injector Hydraulic Pump - Install
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0269 - FMI 03
K65-12B Voltage Regulator Wiring Diagrams
G3500B Engines Inlet Air Temperature Sensor
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Temperature Sensor
G3500B Engines Jacket Water Temperature Sensor
G3500B Engines Atmospheric Pressure Sensor
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0566 - FMI 07 (for EUI Engines)
K65-12B Voltage Regulator Cross Current Compensation
C9 Engine For Caterpillar Built Machines Camshaft Bearings - Remove
3412E, C30 and C32 Marine Engines Heat Exchanger - Remove
C9 Engines for Caterpillar Built Machines Camshaft Bearings - Install
3412E, C30 and C32 Marine Engines Heat Exchanger - Install
3412E, C30 and C32 Marine Engines Aftercooler - Remove