Water Spray System Filter - Clean
A vízpermetes rendszer szűrője a munkagép jobb oldalán található.
- Zárja el a szelepet (1) ahhoz, hogy megállítsa vízáramlást a víztartályból.
Show/hide table
Illusztráció 2 g00946639 (2) Tál
(3) Képernyő
(4) O-gyűrűs tömítés
(5) Fej - Ahhoz, hogy levegye az edényt (2), fordítsa el a szűrőedényt az óramutató járásával ellentétes irányban.
- Szerelje le a szitaszűrőt (3) a szűrőedényről (2).
- Mossa meg a szűrőedényt (2) és a szitaszűrőt (3) tiszta, nem gyúlékony oldószerben. Tisztítsa meg az alkatrészeket sűrített levegővel.
- Az esetlegesen sérült alkatrészeket cserélje ki.
- A vízpermetes rendszer szűrőjének beszereléséhez végezze el fordított sorrendben a leszerelés lépéseit.
Show/hide table
Illusztráció 1 | g06154527 |
Caterpillar Information System:
CB7, CB8, and CB10 Vibratory Asphalt Compactors Water Spray System - Drain
CB7, CB8, and CB10 Vibratory Asphalt Compactors Water Spray Nozzles - Clean
C7.1 Engines and Generator Sets Sensor Signal (Analog, Active) - Test
M315F and M317F Wheeled Excavators Machine System Pilot Lines
C7.1 Engines and Generator Sets Sensor Calibration Required - Test
C7.1 Engines and Generator Sets Relay - Test - Fuel Transfer Pump Relay
C7.1 Engines and Generator Sets Power Take-Off - Test
CB7, CB8, and CB10 Vibratory Asphalt Compactors Rollover Protective Structure (ROPS) - Inspect
CB7, CB8, and CB10 Vibratory Asphalt Compactors Radiator Core - Clean
CB7, CB8, and CB10 Vibratory Asphalt Compactors Offset Cylinder Ends - Lubricate - If Equipped
CB7, CB8, and CB10 Vibratory Asphalt Compactors Hydraulic System Oil Level - Check
308E2 CR Mini Hydraulic Excavator Variable Angle Boom (VAB) Machine Systems Undercarriage Frame - Install
CB7, CB8, and CB10 Vibratory Asphalt Compactors Window Wiper - Inspect/Replace
The Battery Wiring Group Is Now Updated on Certain 303E CR Mini Hydraulic Excavators {1401, 1402, 1408} The Battery Wiring Group Is Now Updated on Certain 303E CR Mini Hydraulic Excavators {1401, 1402, 1408}
CB7, CB8, and CB10 Vibratory Asphalt Compactors Maintenance Interval Schedule
M318F, M320F and M322F Wheeled Excavators Hydraulic System Relief Valve (Trailer) - Test and Adjust
An Improved Grease Line Application is Now Used on Certain Mini Hydraulic Excavators {7510} An Improved Grease Line Application is Now Used on Certain Mini Hydraulic Excavators {7510}
C7.1 Engines and Generator Sets Sensor Signal (Analog, Passive) - Test
Smoke Identification and Troubleshooting on Certain C7.1 Mechanical Engines {1050, 1088, 1250, 1256, 7569} Smoke Identification and Troubleshooting on Certain C7.1 Mechanical Engines {1050, 1088, 1250, 1256, 7569}
C7.1 Engines and Generator Sets Sensor Supply - Test
Smoke Identification on Certain C7.1 Mechanical Engines {1050, 1088, 1250, 1256, 7569} Smoke Identification on Certain C7.1 Mechanical Engines {1050, 1088, 1250, 1256, 7569}
New Software Is Now Used on Certain 320D2 Excavators {7490, 7601, 7610, 7620} New Software Is Now Used on Certain 320D2 Excavators {7490, 7601, 7610, 7620}
An Improved Hood and Guard Group is Now Used on 308E Mini Hydraulic Excavators {7150, 7251} An Improved Hood and Guard Group is Now Used on 308E Mini Hydraulic Excavators {7150, 7251}
GRADE System Calibration and Measure-Up Procedure for the 2D and 3D on Excavators {1408, 7220} GRADE System Calibration and Measure-Up Procedure for the 2D and 3D on Excavators {1408, 7220}