Wheel Loader
Show/hide table
 | |
| Illustration 1 | g02877597 |
The CE plate (2) is located on the PIN Plate (1) when required.
PIN Plate (1) is located on the left side of the machine.
The serial number plate (3) for the engine is located on top of the valve cover for the engine.
Caterpillar Information System:
3406E and C15 Marine Engines Aftercooler - Remove
C-9 Industrial Engine System Configuration Parameters
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C11 and C13 Engines for Caterpillar Built Machines CID 0286 FMI 06 EMS Oil Lamp short to +batt
C11 and C13 Engines for Caterpillar Built Machines CID 0286 FMI 05 EMS Oil Lamp open/short to ground
Installation and Calibration of the 144-0441 Tachometer {7462} Installation and Calibration of the 144-0441 Tachometer {7462}
3306B-XQ200 Rental Generator Set Engine Wiring Diagrams
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3406E Marine Engine Auxiliary Water Pump - Assemble - Type 1
3306B-XQ200 Rental Generator Set Engine Trailer - Inspect
3306B-XQ200 Rental Generator Set Engine Battery or Battery Cable - Disconnect
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0164 FMI 11 Injector Actuation Pressure system fault
PM3516 Power Modules Plate Locations and Film Locations
2001/04/01 The Nomenclature For The 3126 Series Truck Engines Will Change From 3126B To 3126E {1000}
2001/03/01 New Stainless Steel Bolts Are Used In The Aftercooler Housing {1071}
2001/03/01 A New Plastic Belt Guard Is Available {1357}
Conversion of the 0R-9120 Remanufactured Engine From a Front Oil Sump to a Rear Oil Sump Conversion of the 0R-9120 Remanufactured Engine From a Front Oil Sump to a Rear Oil Sump
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Generator Monitoring System Feature Configuration
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Generator Monitoring System Reference Parts Information
3306B-XQ200 Rental Generator Set Engine Attachment Identification
C-15 and C-16 Industrial Engines Maintenance Interval Schedule - C-15
2001/11/19 New Tools Are Available To Help Find The Top Center Position For No. 1 Piston {1105}
G3408C and G3412C Engines Turbocharger
PM3500 Power Modules Switchgear Control Panel