Fuel Filter Base- Primary
Usage:
Remove & Install Fuel Filter Base- Primary
1. Turn the fuel supply valve to the "OFF" position. Remove two bolts (1).
2. Remove fuel priming pump (2) and the gasket.
3. Loosen bolt (3) and remove fuel filter (4) from the fuel filter base.
4. Mark for identification and disconnect the fuel lines. Put caps and plugs on the connections.
5. Remove two bolts (5) and fuel filter base (6).
6. Remove retaining ring (7), bolt (3), and the O-ring seal.
7. Remove gasket (8).
8. Install in reverse order. Torque nut (3) to 24 ± 4 N·m (18 ± 3 lb ft).
Caterpillar Information System:
3412C GENERATOR SET ENGINE Fixed Timing Advance (Used with Series Turbocharger Arrangement)
3412C GENERATOR SET ENGINE Automatic Timing Advance (Used With Twin Turbocharger Arrangement)
3412C GENERATOR SET ENGINE Water Temperature Regulator
3412C GENERATOR SET ENGINE Water Pump
3412C GENERATOR SET ENGINE Crankshaft Main Bearings
3412C GENERATOR SET ENGINE Crankshaft
3412C GENERATOR SET ENGINE Connecting Rod Bearings
3412C GENERATOR SET ENGINE Cylinder Liners
3412C GENERATOR SET ENGINE Pistons
3412C GENERATOR SET ENGINE Flywheel Housing
3412C GENERATOR SET ENGINE Flywheel
3412C GENERATOR SET ENGINE Crankshaft Rear Seal & Wear Sleeve
3412C GENERATOR SET ENGINE Fuel Filter Base-Secondary
3412C GENERATOR SET ENGINE Fuel Injection Lines
3412C GENERATOR SET ENGINE Fuel Injection Valves
3412C GENERATOR SET ENGINE Fuel Injection Nozzles & Adapters
3412C GENERATOR SET ENGINE Direct Injection Adapters
3412C GENERATOR SET ENGINE Fuel Injection Pumps
3412C GENERATOR SET ENGINE Fuel Injection Pump Housing
3412C GENERATOR SET ENGINE Fuel Injection Pump Housing And Governor
3412C GENERATOR SET ENGINE Control Module
3412C GENERATOR SET ENGINE Personality Ratings Module
3412C GENERATOR SET ENGINE Fuel Transfer Pump
3412C GENERATOR SET ENGINE Fuel Transfer Pump