Stick - 1.67 m (5.479 ft)
Show/hide table
 | |
| Illustration 1 | g02873737 |
Show/hide table
| Specification for 382-2900 Hoe Stick Gp and 382-2909 Hoe Stick Gp | |||
| Item | Qty | Part | Specification Description |
| All bores must be free of paint. Coat all bores for pins with black 5P-0960 Grease Cartridge including the bucket, the bushing, and the cylinder pin bores. | |||
| 1 | 2 | 296-9438 Bushing | Assemble so that identification faces the out side. Bore diameter before assembly is 50.200 ± 0.015 mm (1.9764 ± 0.0006 inch). Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch). |
| 2 | 2 | 296-9578 Lip Type Seal | Lubricate sealing lip lightly with the lubricant that is being sealed. Install dust seal so that lip faces the out side as shown. Seal must be assembled so that seal does not extend past boss face. |
| 3 | 2 | 296-9438 Bushing | Assemble so that identification faces the out side. Bore diameter before assembly is 50.200 ± 0.015 mm (1.9764 ± 0.0006 inch). Installation depth is 5.5 ± 0.8 mm (0.22 ± 0.03 inch). |
| 4 | 2 | 150-5697 Lip Type Seal | Lubricate sealing lip lightly with the lubricant that is being sealed. Install dust seal so that lip faces the out side as shown. Seal must be assembled so that seal does not extend past boss face. |
| 6 | 1 | 380-8750 Pin | Diameter is 49.89 ± 0.02 mm (1.964 ± 0.001 inch). |
| 7 | 2 | 8T-4244 Nut | Position the nut (8) to the distance of 0.0 to 1.0 mm (0.00 to 0.04 inch) past the end of the bolts (5). For locking, tighten the nuts (7) against the nuts (8). |
| 8 | 2 | 8T-4244 Nut | |
| 9 | - | - | Stick cylinder must be assembled such that grease zerk is directed as shown. |
| 10 | 1 | 380-8749 Pin | Diameter is 54.890 ± 0.023 mm (2.1610 ± 0.0009 inch). |
| 11 | 2 | 218-5191 Bushing | Assemble so that identification faces the out side. Bore diameter before assembly is 60.200 ± 0.025 mm (2.3701 ± 0.0010 inch). Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch). |
| 12 | 2 | 166-1492 Lip Type Seal | Lubricate sealing lip lightly with the lubricant that is being sealed. Install dust seal so that lip faces the out side as shown. Seal must be assembled so that seal does not extend past boss face. |
Caterpillar Information System:
308E2 CR Mini Hydraulic Excavator Machine System Specifications Boom - 3.39 m (11.122 ft)
Installation of the 346-3423 Pilot Lines Gp on Certain Hydraulic Excavators{5057, 5059} Installation of the 346-3423 Pilot Lines Gp on Certain Hydraulic Excavators{5057, 5059}
C13, C15, and C18 Tier 4 Final Engines Timing - Calibrate
C13, C15, and C18 Tier 4 Final Engines Cooling Fan - Calibrate
C9.3 Tier 4 Final Engines Electrical Connectors - Inspect
C13, C15, and C18 Tier 4 Final Engines ECM - Replace
C13, C15, and C18 Tier 4 Final Engines ECM Software - Install
C13, C15, and C18 Tier 4 Final Engines Injector Trim File - Install
C13, C15, and C18 Tier 4 Final Engines Test ECM Mode
C13, C15, and C18 Tier 4 Final Engines ECM Will Not Accept Factory Passwords
C13, C15, and C18 Tier 4 Final Engines Factory Passwords
3516B Generator Set Engines with Dynamic Gas Blending Customer Passwords
CB44B and CB54B Vibratory Asphalt Compactors Machine Systems Vibratory Valve
308E2 CR Mini Hydraulic Excavator Machine System Specifications Stick - 2.21 m (7.251 ft)
CB64B, CB66B and CB68B Asphalt Compactor Machine Systems Flood Lighting
CB7, CB8 and CB10 Vibratory Asphalt Compactors Power Train Propel Lines
308E CR Mini Hydraulic Excavator Machine System Specifications Stick Cylinder
Extended Idling in Cold Ambient Temperatures Can Cause Diesel Particulate Filter (DPF) Regeneration Issues on Products Equipped with the Caterpillar Regeneration System (CRS){108F} Extended Idling in Cold Ambient Temperatures Can Cause Diesel Particulate Filter (DPF) Regeneration Issues on Products Equipped with the Caterpillar Regeneration System (CRS){108F}
2012/02/28 Boom, Stick, and Frame Groups Require Rework on Certain 312D, 315D, and 319D Excavator {0679, 4150, 6501, 6502, 7062}
308E CR Mini Hydraulic Excavator Machine System Specifications Main Control Valve
300.9D VPS Mini Hydraulic Excavator Machine Systems Cylinder Drift - Check
Installation Procedure for the 384-2317 Coupler Control Arrangement {6129} Installation Procedure for the 384-2317 Coupler Control Arrangement {6129}
318E Excavator Systems Main Hydraulic System
320D Excavator Machine Systems Final Drive - Assemble