Track
Show/hide table
Illustration 1 | g01424704 |
Show/hide table
Item | Qty | Part | Specification Description |
All joints of the link assembly must have flexibility even with a measurable end play of zero. Flexibility is the ability for movement from the weight of the link assembly. | |||
- | - | - | Use the following procedure to tighten the track bolts:
1. Tighten the track bolts to 2. Tighten the bolts to an extra 120 ± 5 degrees. |
The maximum assembly force for the link assembly is |
|||
The assembly force for the master pin (2) is |
|||
A | - | - | Protrusion for the master bushing is |
B | - | - | Distance between the bolt holes is |
C | - | - | Distance between the bolt holes is |
D | - | - | Protrusion for each end of the standard bushing is |
E | - | - | Protrusion at one end of the standard pin (1) is |
Caterpillar Information System:
3126B Engines Basic Engine
C-15 and C-16 Industrial Engines Reference Material
3054 Engine Cylinder Liner Projection - Inspect
3054 and 3056 Marine Generator Set Engines Cooling System - Test
3054 and 3056 Marine Generator Set Engines Cooling System - Inspect
3126B Industrial Engine Turbocharger - Remove
3054 and 3056 Marine Generator Set Engines Cooling System - Check - Overheating
2000/12/01 Recommended Procedure For Lubricating And Tightening The Bolts That Fasten The Counterweights To The Crankshaft {1231}
3054 Engine Engine Oil Pressure - Test
C-15 and C-16 Industrial Engines Sensors and Electrical Components
G3516B and G3520B Generator Set Engines Engine Oil Cooler - Remove
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Injector Solenoids
3054 and 3056 Marine Generator Set Engines Cylinder Liner - Remove
3054 and 3056 Marine Generator Set Engines Cylinder Liner - Install
Marine Monitoring System II Analog Input Module
G3516B and G3520B Generator Set Engines Engine Oil Cooler - Install
3054 Engine Connecting Rod - Inspect
3126E and 3126B Commercial and Truck Engines Engine Storage Procedure - Check
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Prelubrication System
Marine Monitoring System II Related Components
3054 Engine Flywheel Housing - Inspect
3054 Engine Flywheel - Inspect
2001/10/01 A New Configuration of Valve Springs Is Now In Production {1108}
3064 and 3066 Engines for Caterpillar Built Machines Engine Oil Pressure Switch