System Pressure Release
Show/hide table
 |
|
機器突然移動可能會導致人員傷亡。 突然移動機器可能會造成機器上或附近人員受傷。 如欲避免傷亡，在操作機器前，請確認機器四周都已淨空。 |
Show/hide table
|
|
加壓系統: 高溫冷卻液會導致人員嚴重燙傷。 欲打開加注口蓋，需先將引擎熄火，等到冷卻器冷卻下來後， 再慢慢地鬆開蓋子釋放壓力。 |
要釋放冷卻系統內的壓力，請關閉機器。 讓冷卻系統的壓力蓋冷卻。 慢慢地取下冷卻系統的壓力蓋，以釋放壓力。
Show/hide table
|
|
液壓油壓力和熱機油可能會造成人員受傷。 引擎停機後，液壓系統內仍存在液壓油壓力。 在維修液壓系統前若未釋放此壓力，可能會造成嚴重的受傷。 在拆下任何組件或管路前，請確認所有附件均已降下，機油也已冷卻。 僅在引擎熄火，而加注口蓋已冷卻到可徒手觸摸時，才能拆下機油加注口蓋。 |
- 將作業機具放到地面上。
- 關閉引擎。
- 將操縱桿移動通過完整行程。 旋轉操縱桿將會釋放液壓系統內的任何壓力。
- 緩慢鬆開加注口蓋，以釋放液壓油箱的壓力。
- 鎖緊加注口蓋。
- 液壓系統的壓力已釋放。
Caterpillar Information System:
Wheeled Excavators Monitoring System Prestart Monitoring Function
300.9D and 300.9D VPS Mini Hydraulic Excavator Service Interval Chart
Procedure to Install Waste Handling Arrangement on Series D Wheeled Excavators{1353, 1356, 1360, 1386, 1387, 1408, 1931, 5057, 5061, 7000, 7255, 726A, 7272, 7490, 7600, 7601, 7610, 7620} Procedure to Install Waste Handling Arrangement on Series D Wheeled Excavators{1353, 1356, 1360, 1386, 1387, 1408, 1931, 5057, 5061, 7000, 7255, 726A, 7272, 7490, 7600, 7601, 7610, 7620}
M313D, M315D, M315D Series 2, M315D2, M316D, M317D Series 2, M317D2, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Electronic System MID 039 - CID 1627 - FMI 03
M313D, M315D, M315D Series 2, M315D2, M316D, M317D Series 2, M317D2, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Electronic System MID 039 - CID 1627 - FMI 05
300.9D and 300.9D VPS Mini Hydraulic Excavator Coolant System - Flush
C7.1 Engines For Caterpillar Built Machines Ignition Keyswitch Circuit and Battery Supply Circuit - Test
C4.4 Industrial Engine Exhaust Elbow - Remove and Install - Top Mounted and Side Mounted Turbocharger Exhaust Elbow
M313D, M315D, M315D Series 2, M315D2, M316D, M317D Series 2, M317D2, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Electronic System MID 039 - CID 1130 - FMI 05
C7.1 Engines For Caterpillar Built Machines Glow Plug Starting Aid - Test
C7.1 Engines For Caterpillar Built Machines Fuel Pump Relay Circuit - Test
300.9D and 300.9D VPS Mini Hydraulic Excavator Main Relief Valve - Check
2014/08/25 New Torque Specification for the Self-Locking Nut on the Rod Assembly of the Stick Cylinder for Certain Excavators {5458}
314E CR and 314E SR Excavator Systems General Information
301.4C Mini Hydraulic Excavator Battery or Battery Cable - Inspect/Replace
300.9D and 300.9D VPS Mini Hydraulic Excavator Engine Valve Lash - Check/Adjust
300.9D and 300.9D VPS Mini Hydraulic Excavator Fuel Injection Timing - Check/Adjust
300.9D and 300.9D VPS Mini Hydraulic Excavator Fuel Injection Pump - Clean/Adjust
300.9D and 300.9D VPS Mini Hydraulic Excavator Light - Test
300.9D and 300.9D VPS Mini Hydraulic Excavator Fasteners - Check
300.9D and 300.9D VPS Mini Hydraulic Excavator Hydraulic System - Purge
300.9D and 300.9D VPS Mini Hydraulic Excavator Sound Suppression (Covers, Panels) - Inspect/Replace
300.9D and 300.9D VPS Mini Hydraulic Excavator Swing Motor and Swing Gear - Check
301.4C Mini Hydraulic Excavator Swing Gear Grease - Replace