Work Tool Select Menu
用户可以采用以下步骤选择编程设定到监控器和机器 ECM 中的其中一个作业机具。
- 机器的钥匙开关转到接通位置时，将显示监控器的 "Home（主页）"屏幕。 按下 "Menu（菜单）"键以显示主菜单选项。
- 使用箭头从 "Main Menu（主菜单）"中选择 "Work Tool Select（作业机具选择）"。 然后按 "OK（确定）"按钮。
Show/hide table
 | |
| 图 1 | g03711342 |
- 使用箭头从 "Work Tool Select（作业机具选择）"菜单中选择所需作业机具。 按下 "OK（确定）"按钮选择作业机具。
注: 选定的作业机具将显示在监视器屏幕上方的信息栏中。
Show/hide table
 | |
| 图 2 | g03711344 |
- 选择一个新作业机具并按下 "OK（确定）"按钮后，监控器向机器控制装置发送含新激活机具编号的书面请求。 中间功能键编程设定为机具信息。 按下该按钮可打开机具信息页面。
Show/hide table
 | |
| 图 3 | g03711348 |
现在所选作业机具会显示在主页屏幕底部。
Show/hide table
 | |
| 图 4 | g03711352 |
Caterpillar Information System:
300.9D Mini Hydraulic Excavator Gear Pump
C7.1 Engines For Caterpillar Built Machines Engine Wiring Information
C7.1 Engines For Caterpillar Built Machines Oil Consumption Is Excessive
C7.1 Engines For Caterpillar Built Machines Inlet Air Temperature Is High
300.9D VPS Mini Hydraulic Excavator Machine Systems Track Tension Cylinder
300.9D VPS Mini Hydraulic Excavator Machine Systems Swing Cylinder
Installation Procedure for the 330-2521 Front Lines Gp on Certain Hydraulic Excavators {5057} Installation Procedure for the 330-2521 Front Lines Gp on Certain Hydraulic Excavators {5057}
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Transmission Oil Level - Check
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Transmission Oil Sample - Obtain
Data link J1939 on EMCP 3.2 and EMCP 3.3 Fails to Communicate on Certain Generator Sets{4490} Data link J1939 on EMCP 3.2 and EMCP 3.3 Fails to Communicate on Certain Generator Sets{4490}
450F Backhoe Loader Wheel Nut Torque - Check
300.9D and 300.9D VPS Mini Hydraulic Excavator Specifications
M320D2 Wheeled Excavator Hydraulic System Fan Motor Speed (Hydraulic and Radiator Cooling) - Test and Adjust
300.9D Mini Hydraulic Excavator Main Hydraulic System
HEX RIPPERS Maintenance Interval Schedule
General Cleaning Methods {1000, 7000} General Cleaning Methods {1000, 7000}
300.9D and 300.9D VPS Mini Hydraulic Excavator Leaving the Machine
300.9D and 300.9D VPS Mini Hydraulic Excavator Operation Information
Updated Diagnostic Information Is Available for Certain C7 and C9 ACERT Engines That Are Equipped With Hydraulic Electronic Unit Injectors (HEUI) Fuel Systems{1126, 1250, 1251, 1290, 1714} Updated Diagnostic Information Is Available for Certain C7 and C9 ACERT Engines That Are Equipped With Hydraulic Electronic Unit Injectors (HEUI) Fuel Systems{1126, 1250, 1251, 1290, 1714}
Installation Procedure for the 328-0266 Chassis Wiring Gp {1408} Installation Procedure for the 328-0266 Chassis Wiring Gp {1408}
C11 and C13 Engines for Caterpillar Built Machines Ether Injection System - Test
2011/03/09 Machine Software Gp Upgrade is Now Used on Certain M300D Excavators that are Equipped with Hammers and Generators {7610, 7620}
Repair Procedure for Cracks in the Booms of 365C Excavators {0679, 6501} Repair Procedure for Cracks in the Booms of 365C Excavators {0679, 6501}
300.9D and 300.9D VPS Mini Hydraulic Excavator Access Door and Cover Locations