M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Caterpillar


Control Valve (Main)

Usage:

M316D D6W



Illustration 1g02449456

(4) 216-7523 Springs

(1) Torque for two plugs ... 140 to 154 N·m (103 to 114 lb ft)

(2) Free length of 216-8966 Spring ... 47 mm (1.9 inch)

(3) Torque for two adapter assemblies ... 100 to 110 N·m (74 to 81 lb ft)

(5) Torque for four plugs ... 160 to 176 N·m (118 to 130 lb ft)

(6) Torque for four bolts ... 70 to 77 N·m (52 to 57 lb ft)

(7) Torque for three plugs ... 60 to 66 N·m (44 to 49 lb ft)

(8) Torque for ten plugs ... 100 to 110 N·m (74 to 81 lb ft)

(9) Torque for seven relief valve groups ... 100 to 110 N·m (74 to 81 lb ft)

(10) Torque for three O-ring plugs ... 45 to 50 N·m (33 to 37 lb ft)

(11) Free length of 224-9210 Spring ... 49.15 mm (1.935 inch)

(12) Torque for 20 bolts ... 10.4 to 11.4 N·m (92.0 to 100.9 lb in)

(13) Torque for the plug ... 160 to 176 N·m (118 to 130 lb ft)

(14) Free length of 216-8967 Spring ... 57 mm (2.2 inch)

(15) Free length of 202-8523 Spring ... 32.5 mm (1.28 inch)

(16) Torque for the adapter assembly ... 100 to 110 N·m (74 to 81 lb ft)

(17) Torque for the relief valve group ... 25 to 28 N·m (221 to 248 lb in)

(18) Torque for four bolts ... 70 to 77 N·m (52 to 57 lb ft)




Illustration 2g02449516

(19) Torque for two O-ring plugs ... 165 to 182 N·m (122 to 134 lb ft)

(20) Torque for the flow control valve group ... 25 to 28 N·m (221 to 248 lb in)

(21) Torque for the plug group ... 100 to 110 N·m (74 to 81 lb ft)




Illustration 3g02449536

Section B-B

(22) Torque for the nozzle ... 6.5 to 7.5 N·m (58 to 66 lb in)

(23) Torque for the screw ... 15 to 17 N·m (133 to 150 lb in)

(24) Free length of 202-8522 Spring ... 64.0 mm (2.52 inch)

(25) Torque for the pilot ... 15 to 17 N·m (133 to 150 lb in)




Illustration 4g02431882

(26) Torque for ten throttle valves ... 20 to 22 N·m (177 to 195 lb in)

(27) Torque for the breather valve ... 6.0 ± 0.3 N·m (53.1 ± 2.7 lb in)

(28) Torque for 20 bolts ... 10.4 to 11.4 N·m (92.0 to 100.9 lb in)

(29) Free length of 309-2678 Springs ... 53.0 mm (2.09 inch)

(30) Free length of 224-9210 Springs ... 49.15 mm (1.935 inch)

Caterpillar Information System:

324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Remove and Install
M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Gear Motor (Reversing Fan)
300.9D VPS Mini Hydraulic Excavator Machine Systems Relief Valve (Line)
M313D, M315D, M315D Series 2, M315D2, M317D Series 2 and M317D2 Wheeled Excavators Machine System Specifications Control Valve
300.9D VPS Mini Hydraulic Excavator Machine Systems Check Valve
M313D, M315D, M315D Series 2, M315D2, M317D Series 2 and M317D2 Wheeled Excavators Machine System Specifications Hoist Solenoid Valve
300.9D VPS Mini Hydraulic Excavator Machine Systems Boom Cylinder
300.9D VPS Mini Hydraulic Excavator Machine Systems Open Rollover Protective Structure (ROPS)
M313D, M315D, M315D Series 2, M315D2, M317D Series 2 and M317D2 Wheeled Excavators Machine System Specifications Control Valve
M316C Excavator Machine System Axle (Rear)
M320D2 Wheeled Excavator Machine System Specifications Swing Pump
300.9D VPS Mini Hydraulic Excavator Machine Systems Undercarriage Cylinder (Adjustable Gauge)
349F and 352F Excavators Engine Starting
349F and 352F Excavators Machine Systems Final Drive - Disassemble
349F and 352F Excavators Machine Systems Final Drive - Assemble
2013/05/21 An Improved Pilot Control Manifold is Now Used on Certain Excavators {5264}
326F, 329F and 330F Excavators C7.1 Engine Supplement Water Temperature Regulator - Remove and Install
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Clean Emissions Module - Remove and Install
M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Blade Mounting
M320D2 Wheeled Excavator Hydraulic System Relief Valve (Medium Pressure Function) - Test and Adjust
M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Return and Oil Filter Lines
M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Axle (Rear)
M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Boom Cylinder Lines
M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Cab Riser Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.