170-9227 Reamer Shims Will Control Injector Sleeve Reaming {0703, 0706, 1000}
- Engine: Truck with Hydraulic Electronic Unit Injection (HEUI)
- 3116
- 3126
Features/Benefits
The reamer shims are used in order to control the depth of the injector sleeve reaming operation. The reamer sleeves will allow only 0.25 mm (.010 inch) of material to be removed during each reaming. The shims prevent the sleeve from being too deeply reamed. Reamer shims provide a positive stop at the end of each reaming operation. The shims minimize reamer vibration.
Procedure
- Install four shims between the reamer shanks and the bushing.
- The sleeve is reamed until the reamer shank contacts the shim.
- One shim at a time should be removed until proper depth is obtained.
Specifications/Technical Information
Show/hide table
 | |
| Illustration 1 | g00702594 |
(1) 170-9227 Reamer Shims (2) 4C-8713 Reamer Shank (3) 4C-8714 Bushing | |
Thickness ... 0.25 mm (.010 inch)
Number of shims per packet ... 4
Reference
Refer to Tool Operating Manual, NEHS0675, "Using the 143-2099 Sleeve Replacement Tool Group ".Caterpillar Information System:
2000/09/01 New Time Delay Relay Used In The Engine Supervisory System (ESS) {7490}
G3516B Engines E436 Cylinder #16 Detonation Shutdown
G3516B Engines E435 Cylinder #15 Detonation Shutdown
G3516B Engines E434 Cylinder #14 Detonation Shutdown
G3516B Engines E433 Cylinder #13 Detonation Shutdown
G3516B Engines E432 Cylinder #12 Detonation Shutdown
G3516B Engines E431 Cylinder #11 Detonation Shutdown
G3516B Engines E430 Cylinder #10 Detonation Shutdown
G3516B Engines E429 Cylinder #9 Detonation Shutdown
G3516B Engines E428 Cylinder #8 Detonation Shutdown
G3516B Engines E427 Cylinder #7 Detonation Shutdown
G3516B Engines E426 Cylinder #6 Detonation Shutdown
Alternator - Delco 21SI Diode Assembly - Test
G3516B Engines E802 Cylinder #2 High Exhaust Port Temp
G3516B Engines E803 Cylinder #3 High Exhaust Port Temp
G3516B Engines E804 Cylinder #4 High Exhaust Port Temp
G3516B Engines E805 Cylinder #5 High Exhaust Port Temp
G3516B Engines E806 Cylinder #6 High Exhaust Port Temp
G3516B Engines E807 Cylinder #7 High Exhaust Port Temp
G3516B Engines E808 Cylinder #8 High Exhaust Port Temp
G3516B Engines E809 Cylinder #9 High Exhaust Port Temp
G3516B Engines E810 Cylinder #10 High Exhaust Port Temp
G3516B Engines E811 Cylinder #11 High Exhaust Port Temp
G3516B Engines E812 Cylinder #12 High Exhaust Port Temp