Track Adjuster
Show/hide table
 | |
| Illustration 1 | g00704947 |
(1) This surface must be clean and free of protective coating prior to assembly into the track roller frame.
(2) Fill the relief holes with 2P-9065 Lubricant.
(4) The brown colored ring should be installed next to seal (3).
(5) Lubricate the cylinder bore, the piston, and the seal grooves with the lubricant that is being sealed.
(6) Torque for two valves ... 34 ± 5 N·m (25 ± 4 lb ft)
Caterpillar Information System:
G3516B Engines MID 036 - CID 0110 - FMI 03 Engine Coolant Temperature open/short to +batt
G3516B Engines MID 036 - CID 0109 - FMI 08 Engine Coolant Outlet Pressure Sensor noisy signal
325, 325B and 325L Excavators Recoil Spring
325, 325B and 325L Excavators Front Idler
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Analog Sensor Supply
C-10 and C-12 Industrial Engines Cylinder Liner
3176C and 3196 Engines for Caterpillar Built Machines Cylinder Head Valves
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
G3408 and G3412 Engines Actuator Control Linkage - Lubricate
G3516B Engines MID 036 - CID 0106 - FMI 08 Air Inlet Pressure Sensor noisy signal
2000/05/01 New Crankshaft And Camshaft Speed Sensor Groups Available For 1999 And 2000 Model Year Heavy Duty On-Highway Truck Engines {1907}
320C Excavator Machine System Specifications Swing Cushion Valve
G3516B Engines MID 036 - CID 0110 - FMI 04 Engine Coolant Temperature short to ground
G3520B Engines MID 036 - CID 0145 - FMI 03 12 Volt DC Power Supply short to +batt
G3520B Engines MID 036 - CID 0145 - FMI 04 12 Volt DC Power Supply short to ground
G3516B Engines MID 036 - CID 0168 - FMI 02 System Voltage intermittent/erratic
2000/05/01 Available Service Literature for Industrial Engine Electronics {1000}
G3516B Engines MID 036 - CID 0172 - FMI 03 Intake Manifold Air Temp open/short to +batt
2000/07/01 Available Service Literature for Marine Engine Electronics {1000}
2000/05/01 New Warranty for the 3000 Industrial Engines {1000}
G3516B Engines MID 036 - CID 0172 - FMI 04 Intake Manifold Air Temp short to ground
G3516B Engines MID 036 - CID 0175 - FMI 03 Engine Oil Temperature open/short to +batt
G3516B Engines MID 036 - CID 0175 - FMI 04 Engine Oil Temperature short to ground
G3408C and G3412C Engines Crankcase Blowby - Measure/Record