C7 and C9 Engines for Caterpillar Built Machines Caterpillar


E362 Engine Overspeed

Usage:

511 511
产生此代码的情况:

电子控制模块 (ECM) 检测到发动机超速。 故障诊断与排除, "事件代码" 使用事件代码进行故障诊断与排除中提供有本事件缺省设定值与范围的资料。

系统响应:

将会记录该事件代码。

E362-(3) (停机)

  • 发动机将停机。

注: 某些应用情况下,发动机仅减额。

  • 操作员有可能对机器进行了误操作。 确定引发发动机超速的事件。 避免发动机负荷突然下降。

  • 可能存在易燃大气。 检查周围大气中有无碳氢化合物。 不要在周围大气中含有碳氢化合物的环境中运转发动机。

测试步骤 1.

结果:

  • 正常 - 停止

Caterpillar Information System:

C7 and C9 Engines for Caterpillar Built Machines E361 High Engine Coolant Temperature
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Relief Valve (Auxiliary Circuit) - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Counterbalance Valve (Travel) - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Counterbalance Valve (Travel) - Install
C7 and C9 Engines for Caterpillar Built Machines Event Codes
325D and 329D Excavators and 325D Material Handler Machine System Specifications Fuel Tank
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Differential Pressure Switch Circuit - Test
320D Excavator Machine Systems Swing Gear and Bearing - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Counterweight - Remove and Install
M313C Wheeled Excavator Engine Supplement Muffler - Remove and Install
C11 and C13 Engines Electric Starting Motor
C11 and C13 Engines Alternator and Regulator
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Boom Cylinder) - Assemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Load Control Valve (Boom Cylinder) - Disassemble
305.5E CR and 305E CR Mini Hydraulic Excavators Machine System Specifications Bucket Cylinder
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders CID 0091 FMI 08 Throttle Position signal abnormal
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Travel Pilot (Proportional Reducing Valve) - Calibrate
320D and 323D Excavators Machine System Specifications Wiring (Battery)
325D and 329D Excavators and 325D Material Handler Machine System Specifications Recoil Spring
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Electronic Control Module (ECM) - Configure
Hydraulic Gear Pumps Used in Transmissions {3066, 5073} Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Relief Valve (Auxiliary Circuit) - Install
320D and 323D Excavators Hydraulic System Operational Checks
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Relief Valve (Auxiliary Circuit) - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.