Stick - 2.5 m (8.20 ft)
Show/hide table
| |
| Illustration 1 | g03683767 |
Show/hide table
| Specification for 290-9257 Hoe Stick Gp | |||
| Item | Qty | Part | Specification Description |
| All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bucket, and the cylinder pin bores. | |||
| 1 | - | - | Stick cylinder must be assembled in order to orient the grease zerk, as shown in Illustration 1. |
| 2 | 1 | 4I-4618 Pin As | Diameter is |
| 3 | 1 | 4I-4809 Pin As | Diameter is |
| 4 | 4 | 166-1496 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. |
| 5 | 2 | 235-7679 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. |
| 6 | 2 | 241-7231 Bushing(1) | Bore before assembly is Installation depth is |
| 7 | 2 | 228-5617 Bushing(1) | Bore before assembly is Installation depth is |
| 8 | Install the following bushings (7) in the bore so that the part number of each bushing is facing outward.
Bushing is one of the following part numbers: |
||
| 2 | 228-5654 Bushing | Bore before assembly is Installation depth is |
|
| 2 | 228-5617 Bushing | Bore before assembly is Installation depth is |
|
Show/hide table
| (1) | Install the bushing in the bore so that the part number of the bushing is facing outward. |
Caterpillar Information System:
303C CR and 303.5C CR Mini Hydraulic Excavators Hydraulic System Cylinder Drift - Check
303C CR and 303.5C CR Mini Hydraulic Excavators Hydraulic System Swing Speed and Swing Drift on a Slope - Check
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit C7 Engine Supplement Fuel Filter and Base - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit C7 Engine Supplement Cylinder Head - Install
416E Backhoe Loader Differential Oil Sample (Rear) - Obtain
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Fuel Filter Differential Pressure Switch Circuit - Test
C9.3 Engine for Caterpillar Built Machines Engine Oil Pan
303C CR and 303.5C CR Mini Hydraulic Excavators Hydraulic System Travel on Level Ground - Test
M330D Material Handler Joystick Controls - Material Handler
303C CR and 303.5C CR Mini Hydraulic Excavators Hydraulic System Engine Performance - Test - Engine Speed
2005/11/28 The Addition of an Abrasion Sleeve Protects the Hose Assemblies in the Bucket Lines Gp {5057}
C9.3 Engine for Caterpillar Built Machines Engine Oil Filter Base
303C CR and 303.5C CR Mini Hydraulic Excavators Hydraulic System Cylinder Speed - Check
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit C7 Engine Supplement Water Separator and Fuel Priming Pump - Remove and Install
303C CR and 303.5C CR Mini Hydraulic Excavators Hydraulic System Relief Valve (Pilot) - Test and Adjust
M330D Material Handler Engine Starting
M325D MH Material Handler Access Door and Cover Locations
M325D MH Material Handler Braking System - Test
M325D MH Material Handler Cooling System Coolant (ELC) - Change
305D CR and 305.5D CR Mini Hydraulic Excavators Machine System Specifications Stick
303C CR and 303.5C CR Mini Hydraulic Excavators Hydraulic System Relief Valve (Main) - Test and Adjust
303C CR and 303.5C CR Mini Hydraulic Excavators Hydraulic System Relief Valve (Line) - Test and Adjust
C15 Petroleum Generator Set Engines Electronic Unit Injector Rocker Arm
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit C7 Engine Supplement Unit Injector Hydraulic Pump - Remove